What are the basic directions for use?

The directions are Pour approximately 4 oz of Spectracide Stump Remover Granules into each hole. Then fill with hot water to dissolve the granules. Continue to add water to the holes for several days to ensure Spectracide Stump Remover Granules dissolve completely. Allow the decomposition process to take place for four to six weeks before removing the stump

Thank you for your question. Drill two 1-inch holes up to 12 inches deep into an already dead stump.Then into the side of the stump, approximately 3 to 4 inches from the top, drill a 1-inch hole slanting down to connect with the bottom of the center hole. Pour approximately 4 oz of of the product into each hole. Then fill with hot water to dissolve the granules. Continue to add water to the holes for several days to ensure the granules dissolve completely. Allow the decomposition process to take place for four to six weeks before removing the stump.