Welcome to Lowe's
Find a Store

Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.

Build a Stone Raised Planting Bed

Use wall block to create a raised circular bed and add an architectural element to your landscape.

Stone Raised Bed

Tools & Materials

Product costs, availability and item numbers may vary online or by market.

Missing anything? Shop Online

Build Your Raised Bed


Wall block sizes vary by style and market. Use the quantity in the material list as a guide. Also, when purchasing wall block, remember that some block has an interlocking lip on the bottom for use in retaining walls, not stacked block projects.

Step 1

Mark out the perimeter of an 8-foot circle with marking paint, and excavate a trench 12 inches wide and 4 inches deep. The trench may have to be deeper in certain spots if the ground is sloped.

Step 2

Install 4 inches of paver base in the trench, leveling and compacting as you go.

Step 3

Install the first block, making sure it's level side to side and front to back. You can add or remove some of the base material to aid in the leveling. You can also tap the block with a rubber mallet to help adjust.

Step 4

Butt the second block up to the first one, and level the second block to the first one, adjusting as necessary. Continue adding blocks and adjusting until the first level is complete.

Step 5

Start the second course by laying the first block on top of the second course, ensuring that the joint or seam isn't lined up with the joint of the previous course. The second course should be half way over the block on the first course.

Step 6

Continue adding blocks until the second course is complete.

Step 7

Once the second course is complete, install a bead of construction adhesive on the top of it. From there, install the third and final course on to the second course.