1-Pack Structural Hardware

Simpson Strong-Tie   LUS 2-in x 6-in Single 18 -Gauge ZMAX Face mount joist hanger

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options. The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

Simpson Strong-Tie   LUS 2-in x 8-in Single 18 -Gauge ZMAX Face mount joist hanger

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options. LUS joist hangers provide a connection between a joist and header.

Simpson Strong-Tie   6-in 18 -Gauge ZMAX Steel Rafter tie Wood to wood

The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.

Simpson Strong-Tie   LUS 2-in x 10-in Single 18 -Gauge ZMAX Face mount joist hanger

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options. The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

Simpson Strong-Tie   ABA 6-in x 6-in ZMAX Wood to concrete (retrofit) Base

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The AB series also offers adjustability around the anchor bolt to achieve optimum post placement. Many models provide a 1-in. standoff from the concrete to help avoid post-end rot from moisture.

Simpson Strong-Tie   LUS 2-in x 4-in Single 18 -Gauge ZMAX Face mount joist hanger

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options. The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

Simpson Strong-Tie   2-in 12 -Gauge Galvanized Steel Pipe rail tie Wood to wood

Simpson Strong-Tie Pipe Grip Ties make it easy to attach wood fence rails to metal fence posts. Galvanized fence posts typically last longer than wood posts, extending the life of the fence by helping to avoid the common problem of rotting fence posts. Now you can get the look of a wood fence with the durability of steel posts. The PGT is suitable for standard applications as well as corners and splices.

Simpson Strong-Tie   ABA 4-in x 4-in ZMAX Wood to concrete (retrofit) Base

The Simpson Strong-Tie ABA is designed to attach wooden posts to existing concrete. The built-in 1-in standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive SD Connector screws. This versatile post base makes a cost-effective option for securing a post to the foundation.

Simpson Strong-Tie   1.548-in x 1.375-in x 2.048-in 18 -Gauge G185 galvanized Steel Angle

Not only do angles make joints stronger, they also provide more consistent, straight corners. Simpson Strong-Tie offers a wide variety of angles in various sizes and thicknesses to handle light-duty jobs or projects where a structural connection is needed. Some can be bent (skewed) to match the project. For outdoor projects or those where moisture is present, use our ZMAX zinc-coated connectors, which provide extra resistance against corrosion (look for a "Z" at the end of the model number).

Simpson Strong-Tie   BC 4-in x 4-in ZMAX Wood to wood Base

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The BC series is for light base applications.

Simpson Strong-Tie   E-Z Spike 34.88-in x 34.88-in Powder Coating, Black Steel Post spike For Wood Fence

Replacing an entire fence can be an expensive and difficult task. Simpson Strong-Tie offers a line of products designed to help make reinforcing fence posts easy and economical. The E-Z Base, E-Z Mender and E-Z Spike offer simple solutions for all types of fence post projects. The FPBS44 allows easy installation of 4x4 wood posts without digging holes or pouring concrete.

Simpson Strong-Tie   E-Z Base 4-in x 4-in Powder-coated Wood to concrete (retrofit) Base

Replacing an entire fence can be an expensive and difficult task. Simpson Strong-Tie offers a line of products designed to help make reinforcing fence posts easy and economical. The E-Z Base, E-Z Mender and E-Z Spike offer simple solutions for all types of fence post projects. The FPBB44 allows easy installation of 4x4 wood posts on existing concrete.

Simpson Strong-Tie   5-2/7-in 18 -Gauge ZMAX Steel Rafter tie Wood to wood

Simpson Strong-Tie hurricane ties are designed to resist high winds and seismic forces by positively connecting trusses/rafters to the top of wall of the structure. The H1 is designed for nominal 2x lumber. This U-shaped hurricane tie provides faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance.

Simpson Strong-Tie   H1 5-1/4-in 18 -Gauge ZMAX Steel Rafter tie Wood to wood

Simpson Strong-Tie hurricane ties are designed to resist high winds and seismic forces by positively connecting trusses/rafters to the top of wall of the structure. The H1A is designed for nominal 2x lumber. This U-shaped hurricane tie provides faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance. H1A 18-Gauge ZMAX Galvanized Hurricane Tie.

Simpson Strong-Tie   LUS 2-in x 6-in Single 18 -Gauge G90 galvanized Face mount joist hanger

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options. LUS joist hangers provide a connection between a joist and header.

Simpson Strong-Tie   1.548-in x 2.75-in x 2.048-in 18 -Gauge G185 galvanized Steel Angle

Not only do angles make joints stronger, they also provide more consistent, straight corners. Simpson Strong-Tie offers a wide variety of angles in various sizes and thicknesses to handle light-duty jobs or projects where a structural connection is needed. Some can be bent (skewed) to match the project. For outdoor projects or those where moisture is present, use our ZMAX zinc-coated connectors, which provide extra resistance against corrosion (look for a "Z" at the end of the model number).

Simpson Strong-Tie   5-in 20 -Gauge Galvanized Steel Tie plate Wood to wood

Simpson Strong-Tie straps and plates join and reinforce joints with simple, versatile solutions for a wide range of connections. Available in many lengths, widths and thicknesses, straps can be used on the wide or narrow face of lumber for light repairs or heavy-duty projects. Many straps are designed to be used back-to-back on a piece of lumber without fastener interference.

Simpson Strong-Tie   ML 2-in x 2-in x 4-in 12 -Gauge G185 galvanized Steel Angle

Not only do angles make joints stronger, they also provide more consistent, straight corners. Simpson Strong-Tie offers a wide variety of angles in various sizes and thicknesses to handle light-duty jobs or projects where a structural connection is needed. The ML angle combines strength and versatility through the use of Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole pattern allows for back-to-back installation without fastener interference.

Simpson Strong-Tie   2-in x 6-in Single 18 -Gauge ZMAX Angled joist hanger

The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ’s unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.

Simpson Strong-Tie   BC 4-in x 4-in ZMAX Wood to wood Post base/cap hardware

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The BC series offers dual purpose post cap/base for light cap or base applications.