Metal Corner Beads & Caps

ClarkDietrich   1.25-in x 8-ft Quicksilver corner bead Metal 90 degree Corner Bead

Quicksilver™ corner bead is a hot-dipped,highly durable galvanized bead that offers superior corrosion protection. This bead is ideal for humid, moisture-prone conditions and high-traffic areas subject to more than normal abuse. Recognized as a superior corrosion-resistant drywall finishing corner bead, Quicksilver™ corner bead provides a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and perforated for excellent joint compound adhesion.

ClarkDietrich   1.25-in x 10-ft Quicksilver Metal 90 degree Corner Bead

Quicksilver™ corner bead is a hot-dipped,highly durable galvanized bead that offers superior corrosion protection. This bead is ideal for humid, moisture-prone conditions and high-traffic areas subject to more than normal abuse. Recognized as a superior corrosion-resistant drywall finishing corner bead, Quicksilver™ corner bead provides a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and perforated for excellent joint compound adhesion.

ClarkDietrich   1.25-in x 8-ft Vinyl Flexible 90 degree Corner Bead

Vinyl corner bead is a rigid, easy-to-apply 90° corner reinforcement that can be nailed or stapled into place. Multiple perforations along the 1-1/4" flanges enhance joint compound bonding. The pronounced nose provides a ground and screed to help the finisher achieve precise finishing depth. Rigid vinyl is dent resistant, rust proof and maintains shape with no sharp edges or burrs when field cut. All vinyl products readily accept finish treatments such as paint and spray or roll-on textures.

ClarkDietrich   1-in x 8-ft Paper-faced metal 90 degree Corner Bead

Paper-faced metal beads and trims combine galvanized metal corner and edge protection with high-grade paper tape to provide cost-effective, problem-free, compound-embedded drywall finishing. Paper-faced beads virtually eliminate any potential for corner and edge cracking by moving or floating with the gypsum, independent of framing movement or settling. The result is a precise, high-quality, straight and smooth finish, free from unsightly cracks, chips and nail pops. Tape-on paper-faced beads are not fastened directly to the framing like conventional nail-on bead. Joint compound is applied to the underside of the paper flanges, aligned and pressed into place. The joint compound seeps through the perforated holes in the paper to provide superior adhesion and bonding to the gypsum paper. No mechanical fasteners like nails, screws, staples or crimps are used. Labor and material savings are realized by reducing the amount of joint compound needed and eliminating one pass of finishing.

ClarkDietrich   1.5-in x 10-ft Paper-faced metal 90 degree Corner Bead

Paper-faced metal beads and trims combine galvanized metal corner and edge protection with high-grade paper tape to provide cost-effective, problem-free, compound-embedded drywall finishing. Paper-faced beads virtually eliminate any potential for corner and edge cracking by moving or floating with the gypsum, independent of framing movement or settling. The result is a precise, high-quality, straight and smooth finish, free from unsightly cracks, chips and nail pops. Tape-on paper-faced beads are not fastened directly to the framing like conventional nail-on bead. Joint compound is applied to the underside of the paper flanges, aligned and pressed into place. The joint compound seeps through the perforated holes in the paper to provide superior adhesion and bonding to the gypsum paper. No mechanical fasteners like nails, screws, staples or crimps are used. Labor and material savings are realized by reducing the amount of joint compound needed and eliminating one pass of finishing.

ClarkDietrich   0.75-in x 8.0-ft Corner Beads Paper-faced metal 90 degree Corner Bead

Paper-faced OC 3/4-in x 8-ft.

ClarkDietrich   1.25-in x 10-ft Vinyl 90 degree Corner Bead

Vinyl corner bead is a rigid, easy-to-apply 90° corner reinforcement that can be nailed or stapled into place. Multiple perforations along the 1-1/4" flanges enhance joint compound bonding. The pronounced nose provides a ground and screed to help the finisher achieve precise finishing depth. Rigid vinyl is dent resistant, rust proof and maintains shape with no sharp edges or burrs when field cut. All vinyl products readily accept finish treatments such as paint and spray or roll-on textures.

ClarkDietrich   1.5-in x 8-ft Strait-Flex Vinyl 90 degree Corner Bead

Big-Stick installs fast and clean for outside 90º corners. The impact-resistant nose is ideal for high traffic areas where bumps and dents to corners most commonly occur. Big-Stick resists dents and paint chipping, cuts easily with a utility knife or scissors, applies with all-purpose joint compound, and will not rust.

Strait-Flex   2.0625-in x 100.0-ft Solid Drywall Drywall tape

Perfect-90º, a paper laminated composite tape from Strait-Flex, is twice as fast and twice as strong as conventional paper or mesh tapes. No compound is needed over finished surface. Perfect-90º ensures a clean, sharp corner without the risk of damage from a taping knife, will not shrink, and will not fuzz up during sanding. The tape’s outer edge features a diamond punch pattern for a superior bond, faster drying, with no rippling or blistering.

ClarkDietrich   1.5-in x 10-ft Strait-Flex Vinyl 90 degree Corner Bead

Big-Stick installs fast and clean for outside 90º corners. The impact-resistant nose is ideal for high traffic areas where bumps and dents to corners most commonly occur. Big-Stick resists dents and paint chipping, cuts easily with a utility knife or scissors, applies with all-purpose joint compound, and will not rust.

ClarkDietrich   0.75-in x 8-ft Vinyl Flexible 90 degree Corner Bead

Vinyl Bullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Vinyl Bullnose adds contemporary styling and a sense of openness to any room. Available in choice of 3/4 In. or more dramatic 1-1/2 In. radius. Easily installed with nails, screws or staples, this sturdy vinyl product is rust-proof and dent-resistant.

ClarkDietrich   0.5-in x 10-ft Drywall finishes - vinyl Vinyl J shape Corner Bead

Vinyl J-bead provides a finished edge at gypsum board stops around door and window openings and at ceiling intersections. Requires no joint compound. Rigid vinyl is not a thermal transmitter and helps stop condensation where gypsum board terminates at exterior metal surfaces, such as window frames and mullions. Rust proof and dent resistant.

Phillips Manufacturing Co.   1.5-in x 8-ft Metal 90 degree Corner Bead

A corner bead featuring a hot dipped galvanized steel surface coating providing excellent rust protection. Easily installed using drywall nails, screws, staples or a clinching tool. Also feature deeply knurled mud anchors to further ensure perfect mud adhesion.

ClarkDietrich   0.75-in x 10-ft Metal Bullnose Corner Bead Metal 90 degree Corner Bead

Bullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Bullnose adds contemporary styling and a sense of openness to any room. Bullnose bead is nailed, screwed or stapled in place and finished with joint compound. Bullnose to 90° transition caps are available to provide a smooth transition to baseboard or corner molding. They install quickly and easily and can be used with metal, vinyl or paper-faced Bullnose corner bead.

ClarkDietrich   2.25-in x 100-ft Strait-Flex Vinyl 90 degree Corner Bead

Tile-Tape prevents leaks caused by common grout cracks. Tile-tape is applied over seams and corners formed by tile substrate and mold resistant boards in wet areas. Tile-tape is manufactured from a composite material giving the tape strength and mold-resistant qualities. Two times stronger than paper or mesh tape, it will not cut or snag when applying tile setting compound with a notched trowel.

Phillips Manufacturing Co.   1.5-in x 8-ft Paper-faced metal 90 degree Corner Bead

P1 super wide outside corner bead features wider flanges for more complete coverage. This easy to install corner bead that is dent and rust resistant, provides a clean finish to your wallboard corners.

ClarkDietrich   3-in x 100-ft Mid-Flex Composite Flexible 90 degree Corner Bead

Mid-Flex, a laminated composite corner tape from Strait-Flex, beautifully finishes outside corners, off angles and vaulted ceilings. Mid-Flex 300 is also a great choice when replacing damaged metal corner bead. This 3 in. tape features a pre-finished surface with a PUR-laminated nose ensuring perfect corners without paper fuzz-up during finishing and sanding. The tape's outer edge features a diamond punch pattern for a superior bond, faster drying, with no rippling or blistering. To apply, measure and cut to length, then fold in half at center crease with print side facing out. For repairing damaged corner bead, tap the damaged area of the corner bead to be recessed below the corner's edge. Apply all-purpose compound to corner. Press Mid-Flex 300 into the wet compound, adjust to create a straight line and wipe down with a taping knife using additional pressure to the outer edge of the tape. Immediately apply a light skim coat to the perforated edges and let dry. Apply final coat, let dry and sand.

ClarkDietrich   2.125-in x 8-ft Paper-faced metal 90 degree Corner Bead

BEADEX® paper-faced metal corner bead provides a quick, easy way to produce beautiful, sturdy, cost-effective interior corners that withstand the wear-and-tear of normal building use. The paper tape covering ensures excellent adhesion of joint compounds, textures, and paints, delivering a strong, smooth finish. The bead is manufactured with strong, paper tape that is laminated to a sturdy, rust-resistant metal form. It provides superior resistance to edge cracking and chipping, resulting in corners that stay beautiful despite normal building movement and everyday wear-and-tear. The bead installs quickly and easily with a unique paper tape nose coating that resists scuffing and fuzzing from knives and sanding.

ClarkDietrich   0.75-in x 10-ft Vinyl 90 degree Corner Bead

Vinyl Bullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Vinyl Bullnose adds contemporary styling and a sense of openness to any room. Available in choice of 3/4 In. or more dramatic 1-1/2 In. radius. Easily installed with nails, screws or staples, this sturdy vinyl product is rust-proof and dent-resistant.