Ditra is an uncoupling membrane designed for ceramic, porcelain, and stone tile installations on floors. It provides uncoupling to prevent cracked tile and grout. It is made of polyethylene creating a waterproofing layer protecting the substrate. Ditra can be installed over a variety of subfloors including concrete, plywood, OSB and radiant heated floors. The thickness of the tile assembly is minimized by using Ditra, which is only 1/8-in thick.
Uncoupling membrane prevents cracked tile and grout
Provides uncoupling, waterproofing, vapor management and heavy load distribution
Ditra is 1/8-in thick and is designed for floor installations with ceramic, porcelain, and stone tile
Install over a wide range of substrates, including plywood/OSB, concrete, gypsum, heated floors, etc
Easy to install and ready to receive tile immediately
For commercial and residential applications
Roll covers 54-sq ft
Trowel size for installation 1/4-in x 3/16-in V-notch, 5/16-in x 5/16-in V-notch, or the 11/64-in x 11/64-in square notch Ditra Trowel