Power Pro #10 x 1-1/2-in Tan Powder coating Self-drilling Roofing Screws 100 -Count

Fast cutting and secure holding

#10 screws with washers. Dual thread with color coating. Fast gripping and installing. The cut fast and tighten up quick. I didn’t have any of them break.

GREAT PRODUCT AND VERY DURABLE

I USED THE SCREWS TO BUILD A SHEET METAL TOP TO COVER MY COMPRESSOR OUTSIDE MY SHOP. THE SCREWS WORKED VERY WELL AND WENT IN EASY. I ALSO LIKE THE FACT THAT THEY ARE POWDER COATED TO PREVENT RUST.THEY ALSO HAVE A RUBBER SEAL TO HELP FROM LEAKING.

Quality Power Coated Screws

Picked up the Power Pro roofing screws to complete our farmstead mobile chicken coop roofing installation. The Powder coated screws installed in a straight secure manner and without any metal burrs. The weakness of some metal roofing screws can be the brake down of the rubber washer over time from weathering. Looking forward to testing longevity of the products since the sealing gasket is made of EPDM and powder coated. EPDM is known to exhibit superior resistance to heat, light, and ozone e...

Great design, great product!

The PowerPro 2 in 1 Premium Roofing screws are excellent for attaching metal to wood. These screws have a 1/4" hex head and are 1-1/2" long x #10. They come with two types of threads, fine and coarse. These screws are specifically designed for self-tapping into metal sheeting and securing into wood, ensuring maximum holding strength. To provide maximum corrosion protection, each screw head is powder coated three times. Additionally, there is a powder-coated metal washer and rubber gasket under t...

Good quality screw, with gaskets.

Great quality screw that should be able to take care of your roofing/siding needs. Good paint coverage and a solid quality gasket. You wont be diaappionted.

Cool color match

I needed to finish up a small metal shed project and these tan colored screws were just what I needed. The coating on the screws was heavy enough that even with an 20 volt screw gun the paint was not damaged. The screws powered right through the metal siding with ease. The rubber seal ring fit snugly against the metal for a good water proof seal. I will definitely buy this brand when doing my next metal project.

No hammer drill needed!

I used these self tapping roof screws to secure the aluminum threshold on my back patio door. Although its not the listed use for the screw it worked perfectly and matched the color palette. The self-drilling effect made drilling through the aluminum super easy. I had no issues whatsoever securing the threshold although its a thicker material than the screw was intended for. I used a regular drill not a hammer drill and it was very easy to drill.

Nice Metal Roofing/Siding Screw

This is a compact metal siding/roofing screw. This screw is slightly different than screws I’ve used in the past since it has 1/4” hex head as opposed to a 5/16” hex head. This screw should be used on lighter gauge steel framing or wood. This particular screw that I have is a light brown/tan color with the rubber clad metal washer. This screw has a drill bit tip to get through roofing material and light steel supports no heavier than .090”.

Tan Roofing Screws

Tan roofing screws were shipped in a brown paper envelope. Plastic box was smashed and screws were loose every where. Anyway, I changed out a few screws on my barn roof that were leaking due to a smooshed screw collar. It happens every once in awhile. Easy to change them out while being careful not to over tighten.

Metal screws

Very nice sheet metal screws, comes in a variety of colors and very well priced, I used them on regular galvalume metal, really peirces the metal with ease, would recommend this product to anyone needing these screws, good value price as well