The Gorilla Garage Floor Coating (12 pc) Kit is an incredibly durable, two-part, 100% solids epoxy (not water based) system that delivers ultimate protection in just one coat. This high-performance, self-leveling formula provides exceptional resistance to chemicals, abrasions, salt, oil, gas, and hot tire pickup. Perfect for garages, basements, workshops, warehouses, retail stores, concrete floors and more. The high-gloss gray finish gives your concrete floor a clean, showroom-quality look. With up to 550 sq. ft. of coverage, the all-in-one kit includes all the essential supplies you need for a successful DIY project: concrete etch for proper surface prep, mixing buckets, stir sticks, roller covers, epoxy resin 128 fl. oz., epoxy hardener 128 fl. oz., decorative gray blend flakes 1.1lb, and clear, step-by-step instructions with helpful how-to video guides. *Actual coverage may vary based on the condition and porosity of the concrete. ± Timeframes are dependent upon weather conditions and temperature. Cooler temperatures will increase dry time. DO NOT apply when temperatures are below 50° F. Covers up to 550 sq. ft.: Includes two gallons of premium material – enough for a thick, long-lasting coat on a standard 2.5-car garage floor.
INCREDIBLY DURABLE, 2-PART 100% SOLIDS EPOXY: It won’t peel from hot tire contact and is resistant to salt, oil, gas, & other harsh chemicals.
COVERS UP TO 550 SQUARE FT: Each kit includes all the essential supplies to coat a 2.5-car garage.
DIY READY—PROJECT RESOURCES & SUPPORT: A step-by-step instructions guide, how-to video tutorials, and an on-demand virtual assistant to guide you through every step.
DRIVE ON AFTER 1 DAY: Quick curing epoxy resin and hardener allows you to use your space 24 hours after application.
ULTIMATE PROTECTION IN ONE COAT: 2-part 100% solids epoxy delivers, incredibly durable, exceptional resistance to chemicals, abrasions, salt, oil, gas, and hot tire peel-up that is ideal for garages, basements, workshops, & more.
HIGH GLOSS FINISH: Achieve a showroom-quality finish that is crack resistant, peel proof, low VOC, while enhancing the appearance and performance.
12 PIECE DIY KIT: Epoxy resin, epoxy hardener, decorative gray blend flakes, concrete etch for proper surface prep, mixing buckets, stir sticks, roller covers, decorative and easy-to-follow pictured with printed instructions as well as how-to video guides for a seamless application.
PREPARATION: Floor Preparation is key to success for any floor project-Wash the floor with soap and water & use a degreaser, if needed, for oily spots.
