Shield front doors, side entrances, back doors, basement entries, side windows, AC condensers, package drop zones, and small porches from UV sun damage, rain, snow, and falling debris with a 44 x 24 in fixed metal awning that fits doors up to 31.5 in wide. Premium 0.8 mm thick steel tiles paired with a triangular support structure and reinforced straight frame tubes resist wind pressure, snow load, and seasonal humidity through years of outdoor service. The sloped 45 degree angle channels rainwater off to one side instead of pooling on top, preventing water accumulation, sagging, and pressure damage while extending canopy lifespan in heavy rain regions. A clean matte black finish complements brick, wood siding, vinyl, stucco, and stone exteriors as well as garden gates, garage doors, storefront entries, and tiny home or park model RV doors. Note: this awning has a single fixed 45 degree slope angle (not adjustable to 22.5 degrees) and ships only in black; compatible doors must be 31.5 in wide or narrower for full coverage. Customer-tested tip: install foam weather stripping between the canopy and door frame, or apply silicone caulk along panel seams, to dampen rattle noises when slamming doors below the awning. Assembly takes about 1 to 2 hours per unit with included instructions and hardware.
44 x 24 in Coverage Fits Doors Under 31.5 in: 44 x 24 in steel canopy fits doors up to 31.5 in wide for front entries, side doors, basement doors, package drop zones, AC condensers, and side windows
0.8 mm Steel Triangle Support Frame: Premium 0.8 mm thick steel tiles paired with triangular support and reinforced straight frame tubes resist wind pressure, snow load, and humidity through years of outdoor service
45 Degree Sloped Drainage Design: Fixed 45 degree sloped angle channels rainwater off to one side instead of pooling on top, preventing water accumulation and pressure damage in heavy rain regions
DIY 1 to 2 Hour Assembly Black Finish: Complete installation instructions and all hardware included for 1 to 2 hour DIY assembly per unit, with a sleek matte black finish that complements brick, wood, vinyl, stucco, and stone exteriors
Add Foam or Silicone for Rattle Quieting: Install foam weather stripping or silicone caulk between panels and frame edges to dampen door-slam rattle (45 degree angle is fixed not adjustable, black only, no white version available)
Specification: Sunshade Area: 44 x 24 in / 1125 x 610 mm; Overall Product Dimensions: 1125 x 590 x 610 mm (44.3 x 23.2 x 24 in); Compatible Maximum Door Width: 31.5 in / 800 mm; Material: Steel (0.8 mm Thick Tiles); Frame Structure: Triangular Support + Straight Frame Tubes; Tilt Angle: 45 Degree (Fixed, NOT Adjustable to 22.5 Degree); Drainage: One-Side Sloped Runoff; Color: Black (Matte Finish, NOT Available in White); Mounting Type: Fixed (Permanent Installation); Suitable For: Front Door, Side Door, Back Door, Basement Entry, Side Window, AC Condenser Cover, Package Drop Zone, Porch, Balcony, Storefront, Garage Door, Tiny Home, Park Model RV; Customer Tip: Install Foam Weather Stripping or Silicone Caulk Between Panels to Dampen Door-Slam Rattle; Assembly Required: Yes (Approximately 1 to 2 Hours Per Unit); Hardware Included: Yes (Complete Mounting Kit); Available Sizes: 40x42 in, 44x24 in, 48x42 in, 56x24 in, 60x42 in, 80x36 in, 104x36 in; Warranty: 12 Months Manufacturer; Includes: 1 Fixed Metal Awning, 1 Hardware Kit, 1 User Manual; Net Weight: 22.5 lb / 10.2 kg; Package Depth: 18.5 in; Gross Weight: 27.23 lb