True Fine 11-in Motion sensor and diffuser Outdoor 2 -Light Motion Sensor Flush Mount Light with Water Glass
Item #7843677 |
Model #130027CEL
Maximum Qty of 100
Best Price. Guaranteed
Find a lower price on an exact item? We'll match it. Some exclusions apply.
Price GuaranteePay Your Way
Credit card, PayPal or Buy Now, Pay Later options available at checkout. Your choice.
Payment OptionsThis exterior ceiling light includes a built-in PIR infrared motion-activated detector and a dusk to dawn photocell sensor. Upon installation, when the powered is restored, the light will go through a brief Warm-up process for initial activation, then the light will be able to work under below 4 modes upon rotating the dial(rotate the dial to the mode you need): 1. Test mode(use when needed): Rotate the left dial to "Test" position, the fixture remains off until motion is detected. Upon sensing motion, the light will illuminate and stay on as long as movement continues. Once motion stops, the light will automatically turn off after approximately 5 seconds. This mode allows you to conveniently test sensor functionality while conserving energy. 2. Auto Mode(Motion Sensor mode) : Rotate the left dial to "Auto" position. At night, the light turns on once motion is sensed and will stay illuminated as long as movement continues. After motion stops, the light stays on for a preset duration (adjustable from 5 seconds to 3 minutes by rotating the left dial), and then automatically turns off. 3. DTD Mode(Dusk to Dawn mode): Rotate the left dial to "DTD" position. In this mode, the fixture will automatically turn on at dusk, and remains illuminated until dawn. 4. Manual override mode(Timed Dusk to Dawn mode): In Auto Mode, you can activate the Manual Override by quickly switching your wall switch OFF -- ON within 2 seconds. The light will then remain continuously illuminated for approximately 5.5 hours, or until daylight is detected. Once the sensor detects daylight, the fixture automatically returns to Auto Mode. To manually exit Override Mode and revert to Auto Mode, simply repeat the same operation (turning the wall switch OFF and then ON within 2 seconds). This semi flush mount is equipped with 2 x E26 medium base sockets, requiring 2 × 60 Watt Max NON Dimmable incandescent bulbs, or equivalent LED bulb. Bulbs need to purchased separately
ETL rated for damp location
Built in motion sensor and dusk to dawn photocell sensor
Uses 2 × 60Watt incandescent or equivalent LED bulbs
E26 medium base sockets, Non dimmable 60W or equivalent LED bulbs(not included)
Mounting hardware and instruction included for easy setup
A removable glass diffuser is included at the bottom.
4 working modes: Test Mode, Motion Sensor mode, Dusk to Dawn mode, Manual Override mode.
Fixture dimensions: 11"W x 11"L x 5.7"H
It complements a variety of decorative styles, such as Traditional, Transitional, and Vintage.

