Ratings & Reviews for Utilitech 30 -Amp 125/250-volt Industrial Round Range power outlet Receptacles , Black
Ratings may include incentivized customer reviews.
What Customers Are Saying
The product is generally considered reliable and easy to install. Customers praised its sturdy construction, clear instructions, and secure wire connections. Some found it to be a suitable replacement for their old outlet. However, a few reported issues with the design, such as difficulty accessing the screw hole or problems with the ground wire connection. Overall, the product is viewed as a good quality, functional dryer outlet that meets the needs of most users.
Customer review summary generated by AI, including incentivized reviews.Terrible design
Would Not RecommendThe lugs that hold the conductors in place are lousy. There is a little clip that is supposed to bridge two posts and hold the conductor in place. These are cheap, and don't work well. The little clip will kick out sideways when tightening the conductor. This is a terrible design for an electrical device, and probably a fire hazard.
It was just what I was looking for
Would RecommendThe customer service was was great and the check out was great also
Verified Purchaser
does the job
Would Recommendeasy to "hook" up the wires, screw into the wall, the absolute hardest part was deciding which way I should have the wire coming out( below or in back) I also bought a plug which help me put the wires to the correct spot since this is the first time connecting, "color coded" terminals would have made it easier but then again wasn't hard at all.
Verified Purchaser
Easy to install
Would RecommendTypical 4 prong outlet, screws inside are color coded where the wires go. (Bronze color for red and black, white for white neutral buss, and green for ground.) Be sure to install the wire clamp before inserting the cable into the unit.
Very poor quality
Would Not RecommendTook me six times the amount of time that it should have, now to be fair it was a replacement that was mounted close to floor and I just had a knee replacement three weeks ago but once you loosen the screws to slip each wire in the screw and contact plate fall out of grooves, ended up taking it back off wall getting all back in place and putting tape around outside of each one to hold in place long enough to get wire in place
Verified Purchaser
Worked like a charm.
Would RecommendUsed this to add a plug for a larger size air compressor. Had an electrician check my work. Turned on the breakers once completed, and the air compressor worked great. When deciding how to mount it, check what the plug being inserted so that you can mount this receptacle in the right orientation. Otherwise, your appliance cord might have to be turned upside down to plug in correctly.
Verified Purchaser
high quality replacement sub for 3 prong surface
Would RecommendThis was purchased to replace a older 3 prong surface type appliance outlet. it installed easily & works perfectly.
Verified Purchaser