Ratings may include incentivized customer reviews.
What Customers Are Saying
This diamond-coated drill bit performs well for drilling clean holes through ceramic, glass, and tile materials, especially when used with water to keep the bit cool. However, it can be challenging to start the hole and keep the bit steady, particularly on porcelain tiles. Users recommend starting the hole at an angle, gradually straightening the bit as it cuts, and using a low drill speed. The bit may wear down quickly, especially on thicker or harder materials, so it's best suited for light to moderate use.
Customer review summary generated by AI, including incentivized reviews.The price is not that bad
Would RecommendIt works good
From 1-3_SLASH_8-in Wet_SLASH_Dry Diamond Core Drill Bit for Stone Verified Purchaser
Poor performance
Would Not RecommendNeed to put in large numbers not to exceed 400 RPM, dulled quickly
From 5_SLASH_16-in Wet_SLASH_Dry Diamond Core Drill Bit for Stone Verified Purchaser
Dear Lowe's Customer
Thank you for your feedback. We're sorry our product didn’t meet your expectations. Your input helps us impro...
This is perfect for cutting tile.
Would RecommendProduct did as intended.
Thank you so much for your feedback! We appreciate your business.
Read More
It will not work!!
Would Not RecommendIt done nothing!! DO NOT BUY IT!!
Verified Purchaser
Dear Lowe's Customer Thank you for your feedback. We're sorry our product didn’t meet your expectations. Your input helps us improve. Please ...
structural failure
Would Not Recommend10 seconds into drilling and the bit collapsed/twisted
Verified Purchaser
Dear LOWE’S Customer
We are sorry to hear that you had trouble with your hole. We would like to discuss the situation you had and assist you wit...
Kobalt tile bit
Would Not RecommendDoes not last very long and is weak.
Verified Purchaser
Dear LOWE’S Customer
We would like to discuss the details of your project and assist you with a solution. Please feel free to give us a call at ...
Diamond hole saw
Would RecommendI like this product.
Not good for porcelain tiles
Would Not RecommendFrom 1-1_SLASH_4-in Wet_SLASH_Dry Diamond Core Drill Bit for Stone Verified Purchaser
Dear LOWE’S Customer
We are sorry to hear that you had trouble with your blade. We would like to discuss the situation you had and assist you wi...
Failed little bit
The hollow bit got hot and twisted. First time I used it.
Verified Purchaser
Hi Lowe's Customer
We are sorry to hear that you had trouble with your hole saw. We would like to discuss the situation you had and assist y...
Only able to drill 2 holes
Would Not RecommendThe bit had poor quality did not last
From 5_SLASH_16-in Wet_SLASH_Dry Diamond Core Drill Bit for Stone Verified Purchaser
Hi Lowe's Customer
We are sorry to hear that you had trouble with your hole saw. We would like to discuss the situation you had and assist y...
Worked...then broke
Would Not RecommendNeeded a 1/4" bit to anchor a kitchen island to a tile floor. This bit was challenging to work with, took A LOT of time to actually drill through the tile and only worked for 6 holes until it just twisted in the drill. I've done this before in a shower but with a different bit and different size. Saw this bit at Lowe's and thought I'd give it shot. Quality just isn't there like the other brand of bit and certainly didn't last nearly as long as it should have.
Pretty good bit
Would RecommendI had 12- 1/4 holes to drill in porcelain tile. I drilled 6 completely with this bit and decided to just start the remaining 6 after it heated up some and twisted a little. No big deal.. I'll just swap out to the new Spyder for the last 6. Well, the Spyder only lasted 4 1/2 holes. So I ended up going back to the Kobalt to finish the job. Even though it was a little twisted. I made it work. All was drilled with water. Low to medium speed with some pressure using my corded Dewalt drill.
Glass and Ceramic drill bit. Poor Quality for a bi
Would Not RecommendThe bit was recommended by the employee in the window department. No matter what I did the bit just ground itself down smooth
From 5_SLASH_16-in Wet_SLASH_Dry Diamond Core Drill Bit for Stone Verified Purchaser
We would love to know some details on the project you were working on. What tool were you using? How thick was the material, were you using it dry o...
Not worth the $
Would Not RecommendStruggles to drill into porcelain tile. Could not finish one hole. A waste of money.
Hi Lowe's Customer,
We would love to know some details on the thickness of the porcelain tile, the tool you were using, the process as well ...
Poor Quality
Would Not RecommendThe shank/shaft is so thin it bent soon after I started to use it without applying a lot of pressure. I put it in a bench vise to straighten it out to finish the one and only cut it was able to make. I m a contractor and was very disappointed and should have known better to buy a cheap Kobolt tool. I ended up buying a Starrett bit which was American made and much better quality and stronger to finish the job.
Drilling porcelain tile
Would RecommendThis drill bit worked well, I had to drill 9 holes to install my shower door. It drilled perfectly, The key way to do it is start at a 45 degree angle so the drill bit won’t walk around.once it starts you slowly move it to a straight angle.keep the drill wet and clean it out after every hole and you should have no problems.
Verified Purchaser
Thank you so much for your feedback! We appreciate your business.
Read More