Ratings & Reviews for Kobalt Standard (SAE) 1/2-in Drive 11/16-in 6-point Impact Socket Individual

Easy to read size label

It turned out that I didn't need it, and I returned it. I chose it because it looks really nice. :)

Heavy Duty

Underwent lots of use with an impact wrench. Socket held up fine. Even at the socket attachment square.

Heavy Duty

Underwent a lot of use with an impact use and held up fine. Everything looks good.

held up to a lot

had to beat loose a bolt holding my caliper on. couldn't get impact wrench in so resorted to beating breaker bar with a hammer. socket held tight and didnt crack.

Socket review

Works as it should, haven't broken it by using a cheater bar on it.

So much better than a wrench!

This socket saved us so much time installing carriage bolts when we were building our deck. So worth us!

Excellent!

Made very good. All I can say is that, I like it. Wished I had bought a whole set.

Worked well

I needed a socket to remove a 24MM differential drain and fill bolt. This did the trick, can't ask for much more than that.

Good product

Good product works well with 230 psi impact wrench.

The right size for water heater anode.

Hot-water tanks have a sacrificial anode that dissolve away over time (usually several years). You'll need this size socket to remove it - you'll more than likely need an impact wrench and/or a breaker bar to remove the anode.

Tough Socket

I actually bought this socket primarily because the outer diameter of it was what I needed to knock out a pressed bearing. This socket took quite a beating from a hammer and small sledge and is still absolutely serviceable and not much worse for the wear.