Ratings & Reviews for Kobalt 7/64-in 1-5/8-in High-speed steel Countersink Twist Drill Bit
Ratings may include incentivized customer reviews.
What Customers Are Saying
This adjustable countersink drill bit offers versatility with its 3 interchangeable bits to accommodate a range of screw sizes. The adjustable collar allows users to easily control the depth of the countersink, and the self-centering design helps produce accurate, professional-looking results. However, some users have reported issues with the drill bits breaking or wearing out quickly, especially on harder materials, and the set screws may loosen during use, causing instability. Replacement bits can also be difficult to find. With proper care and maintenance, this tool can be a useful addition for DIY projects and light-duty work.
Customer review summary generated by AI, including incentivized reviews.Great countrr sink bits
Would RecommendI love these bits. They are strong and last a long time before needing to be replaced.
From 1_SLASH_8-in 1-5_SLASH_8-in High-speed steel Countersink Twist Drill Bit
Works for me.
Would RecommendHelps with accuracy and is very easy to use. I cannot review quality and how long it will last as other reviews mentioned the drill bit will not last.
From 5_SLASH_64-in x 6-in High-speed steel Self-Centering Hinge Bit Verified Purchaser
holy csks
Would RecommendWorks well. Bought to replace part of kit where pilot drill broke.
Verified Purchaser
Tears wood
Would Not RecommendWhen the counter sink part enters soft wood it tears the wood at entry. Not a clean cut
From 9_SLASH_64-in 3.55mm #6 Standard High-speed steel Countersink Twist Drill Bit Verified Purchaser
Poor quality
Would Not RecommendThe drill bit is made soft material. Three holes and it bent! I was able to use the countersink adapter on different drill bit. You get what you pay for.
From 9_SLASH_64-in 3.55mm #6 Standard High-speed steel Countersink Twist Drill Bit
Very poor quality
Would Not RecommendHaving misplaced two vix bits I've had for years, I was happy to locate this one. The older ones were very precise in operation, but this on is simply terrible. The tool wobbles wildly at even low speeds, and the drill bit itself is such a loose fit in the spring-loaded guide that the holes were off-center, the exact opposite of why I purchased this. Best (mediocre) results were obtained by holding the guide with one hand and operating the drill with the other. Do not buy this product.
Broke during first use
Would Not RecommendPoor quality product. The hex portion spun freely after ~10 holes, then the bit snapped off. I'm very disappointed, wish I had read reviews before.
Broke in minutes
Would Not RecommendThe countersink portion of the bit has small, thin metal parts instead of a robust jacket all around the drill bit portion. As a result, after countersinking about 6 holes into a thin acrylic sheet, one of the prongs broke off and rendered the bit useless for countersinking as it became totally unbalanced.
From 3_SLASH_16-in 4.75mm #10 Standard High-speed steel Countersink Twist Drill Bit
Junk
Would Not RecommendUsed 3 days on cabinet install. About an inch broke off. I drill part way and then back it out to clear the flutes.
From 3_SLASH_16-in 4.75mm #10 Standard High-speed steel Countersink Twist Drill Bit Verified Purchaser
Kobalt 7/64-in x 6-in High-Speed Steel Twist Drill
Would RecommendDoes the job when installing new door hinges. Spring gets stuck occasionally from wood down the shaft, pretty east to clear.
From 7_SLASH_64-in 6-in High-speed steel Self-Centering Hinge Bit Verified PurchaserSweepstakes
Like all other Kobalt bits...
Would Not RecommendTHis thing is pure garbage. I drilled 32 holes with it, and the quick attach chuck adapter fell off. I will add that i was using this in pine, so it would have broken much sooner in hardwood. I swore in the past that i would never buy any more of Kobalt’s bits, as all of them have been trash in the past, but i was in a pinch and this was all my Lowe’s had in stock at the time. DO NOT BUY THIS BIT!
From 9_SLASH_64-in 3.55mm #6 Standard High-speed steel Countersink Twist Drill Bit
Small door hinges
Would RecommendEasy to use for my custom bird cage hinges.
From 5_SLASH_64-in x 6-in High-speed steel Self-Centering Hinge Bit Verified PurchaserSweepstakes
Just what I needed
Would RecommendWorked great for the little hinges I hung on my custom bird cage.
From 7_SLASH_64-in 6-in High-speed steel Self-Centering Hinge Bit Verified PurchaserSweepstakes