Ratings & Reviews for IRWIN SPEEDBOR MAX 1/2-in x 6-in Woodboring Tri-flute bit Drill Bit
Ratings may include incentivized customer reviews.
What Customers Are Saying
The drill bit is generally praised for its effectiveness in quickly and cleanly drilling holes through various types of wood, including hardwoods. It is described as sharp, durable, and able to handle the job with minimal effort. However, some users experienced issues such as the bit pulling the drill forward too aggressively or causing tear-out in certain materials. A few also reported the bit burning out or getting stuck. Overall, the drill bit is considered a great tool for most woodworking applications, but users should exercise caution, especially when drilling in harder woods or encountering obstacles.
Customer review summary generated by AI, including incentivized reviews.Exceptional Product
Would RecommendI have been buying these Irwin bits for years. I’m a builder. These drill real nice, they work great in impact guns and they last for years. I replace them after they wear out. They last typically 2-3 years with bimonthly use. I like how if you purchase a set, you can replace them individually as they need replacing. 37 years in the trades, a true tradesman!
From SPEEDBOR MAX 1-1_SLASH_4-in x 6-in Woodboring Tri-flute bit Drill Bit Sweepstakes
Binding Like Mad
Would Not RecommendBought this drill bit a couple of days ago to drill some holes in basic 2x4 boards. The initial speed tip did a nice job of drawing the bit to the wood but the bit bound within the first pass with the primary blades. With working the bit out and then back in, out and in, out and in, several times, I managed to drill into the basic 2x4 about a third of the way and then gave up. This bit has other good reviews but after about 20 minutes of drilling with it and only getting about a third of the way...
From SPEEDBOR MAX 1-1_SLASH_4-in x 6-in Woodboring Tri-flute bit Drill Bit Sweepstakes
drill bit
Would Recommendworks great, but b very careful of hitting a nail or screw!
From SPEEDBOR MAX 1-1_SLASH_4-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Too much
Would Not RecommendWanted it to drill holes in a stump. The bit bights too quick and deep it stops my half inch heavy duty drill. Too much of a good thing for this job.
From SPEEDBOR MAX 1-1_SLASH_4-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Needed this to drill out a peephole in our new door. Husband did this in less than 4 min.
From SPEEDBOR MAX 5_SLASH_8-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Irwin 5/8 drill bit
Would RecommendNeeded a long 5/8 in drill bit for hiding a wifi router cable behind a cabinet. I then used it to drill several holes in decking to release a water blockage. Worked great on the different materials I had to drill thru.
From SPEEDBOR MAX 5_SLASH_8-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
As advertised
Would RecommendI was not sure how this bit would do with my 1.5 amp battery on my cordless drill, but I was suprised at how easy the 5/8” bit chewed through the wood with a full battery. Drill did eventually end up getting hot, so I switched to the plug in drill and had no issues. Bit stayed sharp boring about 50 holes through 4x4 treated lumber.
From SPEEDBOR MAX 5_SLASH_8-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Very Sharp
Would RecommendI used this drill bit to make a hole in a desk top I made to insert the cords from a computer and lamp. It's very sharp and fast.
From SPEEDBOR MAX 1-1_SLASH_4-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes