Ratings & Reviews for Hubbell RACO 1 -Gang Galvanized steel New work/Old work Switch/Outlet Electrical Box
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise these metal junction boxes for their sturdy, well-built construction and ease of retrofit installation. Reviewers consistently highlight the thick metal, robust design, and reliable performance, particularly for old-work electrical applications. Many appreciate the shallow depth and side knockouts that fit perfectly in tight spaces like kitchen islands and under-counter installations. The mounting ears enable secure, straightforward installation with wood screws. Some note the shallow profile works well for dimmers and single switches but caution it's snug for GFCI receptacles with multiple cables. A few mention missing cable clamps or occasional knockout misalignment. Overall, most customers find the boxes ideal for confined spaces and retrofit work.
Customer review summary generated by AI, including incentivized reviews.Metal Electric boxes
Would RecommendGreat quality metal electric box that met my needs
Verified Pro
Hole in the wrong spot
Would RecommendWe all love to use the thinner box. It takes up less space in the cabinets. So who's bright idea was it to put the rear hole for the wires in the center? Once the fastener is connected and the romex is coming through even the thinest outlet can't fit in this box. You can't use the top or bottom hoes because the wood covers them. The holes for this box should be on the back but one end. This way the outlet on the inside has space for the wires and the fastener.
From RACO 1 -Gang Galvanized steel New work_SLASH_Old work Switch_SLASH_Outlet Electrical Box Verified PurchaserVerified Pro
Lack of products in Electrical Dept.
Would Not RecommendThe only reason i bought the metal outlet box is because the shelves in the Electrical Dept at the Lowes in High Ridge Mo were almost completely empty .
From RACO 1 -Gang Galvanized steel New work_SLASH_Old work Switch_SLASH_Outlet Electrical Box
How to work the knock out
Would RecommendThis is a perfectly fine electrical box. Knockouts are har on any box if you don't know how. For those who do not know, there is a technique to open up the knockouts. Look for where the knock out is hinged - that is - attached more firmly. Go 180 deg across from the attachment tab, and as the other reviewer said use a hammer and screwdriver, and hit it - hard - with authority right at the edge. It will open like a flap. Pry it open and work it back and forth two times.
We appreciate your 5 star rating.
Standard knockouts, you just need to not be dumb
Would RecommendPut a screwdriver on the edge of the circle and smack with a hammer. Just like every knockout ever made.
Not good for much
Would Not RecommendMust be ganged to meet code even for a minimum of 1 wire & one device
From RACO 1 -Gang Galvanized steel New work_SLASH_Old work Switch_SLASH_Outlet Electrical Box
Bad purchase
Would Not RecommendKnockouts hard to get out.Box bends trying to get knockout removed.
Verified Purchaser
Thank you for the positive rating.