Ratings & Reviews for Gardner Bender 24 -Pack 0.75-in W x 4-in L Plastic Wall Plate Spacer

Solved the issue

These work well. We had put backsplash on our kitchen wall and these worked well to push the outlets out so they were flush with the backsplash. Only issue I had was that the spacers didn't stack that well and would separate while trying to install them. By the way make sure you buy some extended #6 machine screws to replace the standard screws that come with the outlets as depending on how many spacers you use they may not be long enough.

The perfect spacer

This is a better product than other I have tried. Not that they were all bad, these are superior and I will buy them again.

Works well and easy to use!

A must have when installing tile backsplash to space out your outlets.

Wall plate spacer

Small device but so very useful! Great price for product package size.

Gardner Bender Electric Wall Plate Spacer

Worked really well! Just do not put a lot of torque on the screws of the wall spacer will open. Also, you need to be able to hold in place so that if you do torque the screw it will not open and fall off.

Easy to use and install

Great and easy to install. Easy to break off and slip behind outlet.

Worked as designed

Used these in my kitchen after installing back splash and they were exactly what I needed.

I have never been good at getting the electrical box exactly flush with the drywall. This product eliminates that problem when I fall short of perfection. Wonderful product!!!

Very handy worked perfectly

Neat little trick for outlets on backsplash and plugs

Works good for outlets with backsplashes

These work well for moving your outlets out after tiling. Tip: use 2 inch drywall screws to secure the outlets/switches to the plastic electrical boxes.

Spacer

Really helped with aligning the outlets to the cover plater, looked for these for quite some time before I finally found them

Perfect for a professional looking tile job

Hubby and I recently finished some cosmetic updates to our kitchen, which included tiling countertops and adding subway tile backsplash. we tried the box extenders, but, since this is a 1940s house, they did not work. So Hubby chose these wall plate spacers. Three of them stacked together under each end of the wall plugs worked perfectly.

Move it out

Doing some minor remodeling and used these spacer to reset the switches and plugs, a lot easier than and cheaper than buying small washers and layering them in.

Easy to apply spacer

I’ve just finished my kitchen by adding a tile backsplash. In order to put the electrical outlet cover on we needed spacers, I was able to stack the correct amount and space it with not a problem at all

handy product

Makes bringing outlets flush with tile backsplash easy