Ratings & Reviews for Fluidmaster Universal x 1/2-in FIP x 20.0-in Braided stainless steel Flexible Faucet Supply Line

Good quality, right price

Worked great for the larger connection for the utility sink faucet.

Needed a replacement hose

I purchased this hose to replace the broken copper hose that was initially installed in my bathroom that broke when I was replacing my faucet. The old copper hose was horrible, not sure why those were ever used but this hose is great. It made my installation go so smoothly. I’m thinking of replacing all of the hoses in my house now.

Steel braided water riser

I like the product. Will buy again. I had a very minor amount of (frayed?) braid that I noticed when I made the connection because the wire poked my hand, but it wasn’t major and didn’t cause any real problem.

As stated

This part worked the way I expected and fit tightly.

Does not Seal

I bought these from Lowes as both Lowes and Home Depot were completely sold out of any 3/8 comp 1/2 fip lines, being universal I didn't think I could go wrong. As many know it doesn't take a rocket scientists to install a supply line and usually simply hand tightening will be enough to seal the line. I screwed in the 3/8 adapter to my supply, and screwed on the line. Turned water on and water sprayed everywhere (never seen a line do that especially from both hot and cold lines). Packaging sta...

Not for flared fittings

Although the packaging of this product strongly implies that it will fit any water supply valve, in fact it works only on compression fittings. It turns out that my fittings are 3/8" flared fittings. Fortunately, a 3/8" compression fitting will not even begin to screw onto the flared fitting, so it is clear that there is a problem from the outset. The design of this product is clever and it appears that it would work quite well within the universe of compression fittings. I've attached a photo...

Great for questionable sizes(or you forgot)

Used these to attach a new faucet to water lines that where installed in the 60's. Normally, not an issue but the lines were copper with an unusual configuration so wasn't exactly sure which size was going to work correctly. These were the perfect purchase for this type of situation or if you were to get to the store and forget which size your fittings are on the shutoff valves. It comes with 3 adapters, all of which are of the most common sizes you would normally run across. Just screw the size...

These are a great time saver and really great

The problem with this item is the longest length in stock was 20", need to stock at least 30 - 36" and preferably 48".

Only For The Desperate

This is a flexible pipe with fittings (1/2"). If you cannot run real pipes, then this will do. If you have to uninstall for some reason, the plastic seals may be deformed and unusable. These will work if you must.

Does what it should.

I bought this because I was replacing a kitchen faucet and always update the hoses on such projects. Forgot to check what size fittings I needed so rather than make another trip I bought the universal hoses... The first time I've used this type. Simple as screwing on the right adapter. Worked perfectly, no leaks. Would buy them again.

Got old pipes? This is what you need.

I got this to replace the water feed lines for my new kitchen facet, used the adapters for the old pipes for my house. Can't go wrong with it.

Easy product to install

Easy to install with fingers right out of the box. 1/4 turn with wrench to tighten and no leaks on either hot or cold water lines.

Save yourself a trip.

This hose has three adapters to make it work for most connections.