Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise this chop saw for exceptional cutting performance and precision across steel, aluminum, pipe, and angle iron, delivering clean, burr-free cuts without sparks or post-grinding. Reviewers highlight the cool-to-touch results, accurate 45-degree and square cuts, sturdy quiet construction, and lightweight design that saves significant time compared to older saws. The integrated clamping vise and stand enhance usability and stability. A few mention replacement blade costs and rare mechanical issues, but these concerns are minimal and do not diminish the overwhelming positive consensus that this represents a worthwhile investment.
Customer review summary generated by AI, including incentivized reviews.Great Saw
Would Recommend[This review was collected as part of a promotion.] This type of saw is perfect for any shop working in metal.
From evolution
Must Have For Anyone Working With Metal.
Would Recommend[This review was collected as part of a promotion.] This thing is a beast! Not only does it cut quickly, the squareness is pretty amazing as well which makes it much more efficient and gives you a better outcome and quality project. If you are considering buying one, don't wait, just get it and you'll be happy that you did. Great purchase for anyone who's works with metal.
From evolution
It’s truly amazing and worth every dollar!
Would Recommend[This review was collected as part of a promotion.] The speed and efficiency is unbelievable. I will never go back to an abrasive chop saw again. No ends to cleanup and the steel is cold and ready to work with. Couldn’t be happier with the purchase. It’s a worthwhile investment for any fabricator.
From evolution
Cuts amazingly
Would Recommend[This review was collected as part of a promotion.] The saw works very well. Compared to an abrasive cutoff saw it’s no comparison. Cuts like butter. My two complaints are that when clamping at 45 degrees the clamp pulls your piece out of 45 as you tighten it. They need to fix this somehow. Also the saw is packed in styrofoam which is not recyclable. They should switch to cardboard. I would also like to see a shop vac attachment as this saw produces 10000 tiny metal splinters that are almost im...
From evolution
Hundreds of times better than abrasive chopsaw
Would Not Recommend[This review was collected as part of a promotion.] Cuts very well and cleanly. Leaves hardly any burrs. Lining up for accurate angle cuts is a challenge bc clamp may move material a bit.
From evolution
Nice Cuts!
Would Recommend[This review was collected as part of a promotion.] I’ve been impressed with ability to cut repetitive pieces quickly! It really speeds up the projects I’ve been working on! Nice smooth cuts without needing to grind the cuts as opposed to my old abrasive chop saw. The only con I can think of is the table that I purchased with the saw, sometimes you have to reposition the saw on the table , to clear the clamps that hold the saw to the table. A lower profile clamping apparatus would make this ...
From evolution
Time is money!
[This review was collected as part of a promotion.] This saw saves me so much time! I love how fast it cuts compared to an abrasive saw.
From evolution
Fantastic saw
Would Recommend[This review was collected as part of a promotion.] This saw is a game changer! It cuts like I’ve never seen before. The deck is ridged and the miter an clamp are easy to adjust so tight no movement at all. Plenty of power
From evolution
love this saw!
Would Recommend[This review was collected as part of a promotion.] this saw is amazing, I've been using traditional chop saws as a fabricator for years and this is a game changer. straight cuts, no burr. I love it!!
From evolution
No regrets
Would Recommend[This review was collected as part of a promotion.] Will no longer go back to abrasive wheels. Virtually burr free.
From evolution
Straight and true
Would Recommend[This review was collected as part of a promotion.] This has been a good purchase. I have used it a lot building trailers. Cuts 2x2x3/16 and 2x6x1/4. It does make a mess with the chips.
From evolution
New 14in cut metal saw.
[This review was collected as part of a promotion.] So far cuts great just wish you could add a material stop setup for it.
From evolution
Great saw.
Would Recommend[This review was collected as part of a promotion.] I should have buoght this a long time ago.Had to cut 2" x 4" x 1/4" steel tubing for rackbody pockets, went through like wood in a chopsaw. And this was the S355. Much better than the 14" abracive cutoff saw and way quicker !
From evolution
Top Notch
Would Recommend[This review was collected as part of a promotion.] Works as advertised, top of the line for quick clean cuts every time.
From evolution
It is a good saw!
Would RecommendI purchased this to upgrade a less expensive HB chop saw, I'm a "hobbyist" self-taught welder, the hobby is turning into making also practical fixes and creations. Because of the starts and indeed the budget I started as "cheap" as possible, then I started noticing how little tasks can totally slow you town and be frustrated. Investing on a better cutting tool was the necessary first step. The S355cpsl it's an impressive saw, I can only imagine the newer and better models and related additional...
From evolution
Smooth as buttah!
Would Recommend[This review was collected as part of a promotion.] I bought this a few weeks ago and couldn't wait to use it.... clean cuts and less dust in the air compared to an abrasive saw. Buy it!!! ..... you will kick yourself for waiting!
From evolution
Must have - best cuts you will ever see
Would Recommend[This review was collected as part of a promotion.] This tool is great! The cuts are accurate, fast, square, cool to touch, and little to no bur. All of the things that abrasive cutoff saws don't do. I've made over 250 cuts of 1 1/2" and 2" square tubing and the blade is still going strong. This tool is a must-have for the professional or weekender.
From evolution
Amazing cut quality!
[This review was collected as part of a promotion.] I’m building a rock crawler buggy and using my old chop saw was just not cutting it, pun intended haha. I had heard good things about the evolution but boy was I blown away with the performance. It cut through 2” heavy wall dom tubing like butter and made a super clean and straight cut. Needless to say I’m quite impressed. I also love the handle for making angle changes quickly without needing a wrench.
From evolution
Great Saw
Would Recommend[This review was collected as part of a promotion.] We were starting a steel pipe entrance for or property. Instead of using a cutting torch, we decided to purchase the Evolution metal chop saw. What a great decision. We had a lot of 2-7/8" steel pipe, and it had no issues making the cuts. We were even able to do great miters with the adjustable rail. My only regret is that we didn't purchase the compound miter saw.
From evolution
Evolution S355CPSL best purchase in years!
Would Recommend[This review was collected as part of a promotion.] The Evolution S355CPSL works great and probably one of the best investments i could have made. It's made cutting steel and aluminum so easy and fast with precision accuracy. Wish I would have bought it sooner it's a must have if metal working tool.
From evolution
Thank you for your positive feedback-we love to hear it! We are so glad you're happy with it and that you feel it's been the best, fastest and cleanes...
We’re happy to hear the saw is helping you work faster with smooth cuts that keep the process grind-free ! Thanks for the helpful feedback on the tabl...