Ratings & Reviews for DEWALT Tube Of 100 No. 20 Size Biscuits

Horrible, inedible

These biscuits are the worst I've ever tasted. I can't believe a company as reputable as Dewalt would sell something that would taste as bad as these.

Biscuit made a tight joint

Nice tight fit

Hit the spot

Absolutely delicious, went back for seconds

in a pinch, yes. sizes all over the place

uneven sizes, each biscuit is either too tight in the groove or flopping around in there

not consistent

I bought a jar of the #20s. I immediately threw several away as cracked or broken. Others were far too thin or too thick. Other brands have been more consistent so I was surprised that Dewalt did not have better quality control. I don't have a percentage of usable biscuits

Some too thick.

Most were fine, but about 20% were over thickness and would not properly slide into the cut slots which were at spec.

Inconsistent Thickness

There is a large range of thicknesses of these biscuits. A large portion of what I received are too thick to use, many are very thin, and very few are the expected thickness. I'm very disappointed in this from such a reputable brand name.

Inconsistent

The biscuits were very inconsistent thicknesses. I had to hand pick ones that fit.

Absolute Junk

These biscuits have no consistency in thickness. You could actually feel the difference in thickness between different pieces. About 1/3 of them were non useable.

Poor quality control – 10 of 100 useable

I did not read the product reviews and clearly should have taken the time. The #20 biscuit thicknesses were completely random. 90% were too thick and would not fit. I separated the good from the bad and ended up with less than 10% good. What a waste of time and money. DEWALT has historically produced quality products and I own several. I will be looking at other vendors for woodworking equipment as the need arises.

Uneven Thickness

I needed to build some bookcases and decided to use biscuits to join the parts. These biscuits made the job more difficult. More than half the biscuits were too thick and I had to sand them down. Many others were too thin. They were anywhere between 3/32" and 5/32". I'll be looking elsewhere for my next project.

poor quality - broken and bad sizing

I'm a professional carpenter and have noticed DeWalt quality slipping in different products. Now, the decay seems to have reached the biscuit production. I have been through countless jars of DeWalt biscuits #0, #10, #20. I have relied on a consistent quality in thickness. Having now read the current reviews, I will turn to other products outside the Stanley Black and Decker DeWalt Porter Cable etc family. I had 15-20% loss on this purchase. At 20% loss, the customer is effectively paying 12.50....

Easy to find, order and arrived quickly!

Good quality

Inconsistent.

Too much size inconsistency. A third were about right, a third too much wiggle room, and a third needed hammered in.