Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers praise these screws for their excellent color match and clean aesthetic on composite decks, with small heads creating a professional, discreet finish. Most find the final result solid and reliable when installation conditions are optimal. However, a notable group reports persistent screw head stripping issues even with pre-drilling, with some experiencing failure rates of 10-30%. Many note pre-drilling is essential despite product claims, and aggressive threads can cause material melting. Despite installation challenges, those who overcome them consistently describe excellent hold and board security.
Customer review summary generated by AI, including incentivized reviews.Counter sink & clean look same color as deck
Would RecommendCounter sink & color of decking ..easy to work with.
Worked well
From #10 x 2-1_SLASH_2-in Composite Deck Screws 75 -Per Box Verified Purchaser
have an extra torx bit on hand
Would Not Recommendthe product advertised as non strip but many of these did strip out while sinking
From #10 x 2-1_SLASH_2-in Composite Deck Screws 375 -Per Box Verified Purchaser
Worst composite deck screws I've ever used
Would Not RecommendLike so many of the other commenters I had two distinct problems with using these screws to secure my composite deck boards to the framing. 1. I had to consistently drill pilot holes to even get the screws started. They did not penetrate the composite decking as was advertised. 2. I always had a second screw ready to replace the one I initially put in because the screw head started to strip (I got to recognize that sound pretty quick) and it wouldn't go into the framing. I've used other brand c...
Good they don't strip out
Would RecommendThese are good screws bo pre drill
Great product and looks.
Would RecommendWorked perfectly as intended. I predrilled small hole each one. No effort installing them after that. Dont countersink them per directions. Looks great.
Easy to drive
Would RecommendI enjoyed using this product. With the correct bit it was easy to drive without the bit slipping out of the end of the screw. It has a small head so that it didn't displace much product when sunk below the surface of the product. Doesn't call attention after installed.
Stripped out Easily
Would Not RecommendThese stripped out really easily using the bit that came with them. I have put in tens of thousands of screws and these were not good at all, after about 20 i stopped and used a different brand
Hello, Thank you for providing us feedback on your product experience. We apologize that the product did not perform to your expectations, and we wil...
Lots of striped screws.
Would Not RecommendThey are not great. Out of the three boxes we bought probably 1/2 a box we threw out after they got stuck in the deck part way in. The tops just fell apart as they went in.
Hello, Thank you for providing us with information on your product experience. We apologize that the product did not perform to your expectations and...
I do not recommend theses screws
Would Not RecommendThe screws start hard and strip very easily. Approximately 25% of the screws stripped even after pre-drilling the holes. I do not recommend
Hello, Thank you for providing us with information on your product experience. We apologize that the product did not perform to your expectations and...
Hello, Thank you for providing us insight on your product experience. We apologize that the product did not perform to your expectations and we will ...