Ratings & Reviews for Bosch Natural Stone Tile 5/16-in x 2-in High-speed steel Masonry Drill Bit For Hammer drill
Ratings may include incentivized customer reviews.
What Customers Are Saying
The overall sentiment towards this product is mixed. While some found it effective at drilling through various tile materials, including hard surfaces like marble and granite, others experienced issues with the bit dulling or breaking after just a few uses. The bit seems to work well for softer tiles like travertine, but may struggle with harder materials like porcelain. Drilling slowly and steadily, and potentially using a pilot hole, appears to yield the best results, as going too fast can cause the bit to overheat and fail prematurely. The durability of the bit is inconsistent, with varying reports on its lifespan.
Customer review summary generated by AI, including incentivized reviews.works good 1 time
Would Not RecommendHad to drill through 1 inch granit. this bit lasted 1 hole. Thats it. No More
From Natural Stone Tile 3-1_SLASH_16-in x 2-in High-speed steel Masonry Drill Bit For Hammer drill Verified PurchaserSweepstakes
Blunt after three holes drilled
Would Not RecommendI bought this bit to drill six holes in tile floor to install new toilet flange. After drilling three holes the bit was blunt. Very disappointed as I now have to go buy a different bit to get the job done. I drilled at slow speed both dry and with water dam and neither seemed to really work too well with this bit.
From boschtools.com
Thank you for bringing this to our attention. We apologize for the issue you had with the NS400 Bit. This bit is use for natural stone. Any hard mater...
Not worth the effort
Would Not RecommendWas only drilling through tile. Dulled quickly. Would not recommend.
From Natural Stone Tile 3-1_SLASH_16-in x 2-in High-speed steel Masonry Drill Bit For Hammer drill Verified PurchaserSweepstakes
Thank you for your review and feedback. We apologize that the bit did not last long. The NS200 drill bit can only drill into glass and regular tiles....
Bosch 1/4-in High-speed Steel Flat Rotary Drill fo
Would Not RecommendBought the bit for drilling into brick--it was extremely hard to drill the hole. I had to resort to a different bit. I figured if it worked for tile, it should work for brick. It didn't
From Natural Stone Tile 1_SLASH_4-in x 2-1_SLASH_4-in High-speed steel Masonry Drill Bit For Hammer drill Verified PurchaserSweepstakes
Thank you for your review and feedback for the NS300 Bit. We apologize for the inconvenience that you have experienced. This bit is solely for natura...
Pretty darn good!
Would RecommendCut through fairly fast. Slow spreed (1500 to 2000 RPM), dry, you go much faster you'll burn it out. Worth the $4+ bucks.
From Natural Stone Tile 1_SLASH_4-in x 2-1_SLASH_4-in High-speed steel Masonry Drill Bit For Hammer drill Sweepstakes
Better then expected
Would RecommendI have allows used the arrow head ones Would only get 4 good holes. Thought I would try this one. I had 10 holes to drill an took care of all.
From Natural Stone Tile 1_SLASH_4-in x 2-1_SLASH_4-in High-speed steel Masonry Drill Bit For Hammer drill Verified PurchaserSweepstakes
wore out two installing a glass shower on new tile walls.
From Natural Stone Tile 3-1_SLASH_16-in x 2-in High-speed steel Masonry Drill Bit For Hammer drill Verified PurchaserSweepstakes
light use so far
Would RecommendBought this bit to drill drain holes in the bottom of ceramic pots of varying thickness. Worked as advertised, bit is still good after that light use and no pots were damaged because of the bits inability to punch through cleanly. Would purchase again.
From Natural Stone Tile 3-1_SLASH_16-in x 2-in High-speed steel Masonry Drill Bit For Hammer drill Verified PurchaserSweepstakes
Bosch drill bit
Would RecommendUsed this to screw thru porcelain tile in bathroom to put up shower doors. Went thru three other brand names that did not work. This one did a great job
Verified PurchaserSweepstakes
Tile drill bit
Would RecommendThe drill work well with my hammer drill for a clean hole
From Natural Stone Tile 3-1_SLASH_16-in x 2-in High-speed steel Masonry Drill Bit For Hammer drill Verified PurchaserSweepstakes
Drilled Porecelain Floor Tile
Would RecommendI needed to install a floor pedestal bathroom sink after installing the floor. I used 2 bit sizes, one for the pilot hole and then the final (both this brand and style). I taped the floor first and gently taped a dimple to start. Worked like a charm. Use some water to cool and keep down dust and use a slower rate of drilling speed. I did think it dulled the bit relatively quickly I felt.
From Natural Stone Tile 1_SLASH_4-in x 2-1_SLASH_4-in High-speed steel Masonry Drill Bit For Hammer drill Sweepstakes
Perfect bit.
Would RecommendI use this bit for all types of stone stucco granite porcelain ceramic I install Grab Bars for seniors.
Sweepstakes
Great drill bit, for the correct tile.
Would RecommendBought to drill through tile to install a shower door. The tile was commercial grade floor tile backed by concrete, which requires a drill press. But, this is the ONLY drill bit that finally bored a hole as I went through 7 other lower grade bits.
From Natural Stone Tile 1_SLASH_4-in x 2-1_SLASH_4-in High-speed steel Masonry Drill Bit For Hammer drill Sweepstakes
Bosch Rotary Drill Bit
Would RecommendNeeded a drill bit to drill through subway tile in order to hang floating shelves and this still bit was perfect for the job.
From Natural Stone Tile 3-1_SLASH_16-in x 2-in High-speed steel Masonry Drill Bit For Hammer drill Sweepstakes
We are sorry to hear the issue you had with the NS200 Natural Stone Drill Bit. We recommend using a diamond hole saw for hard type of tiles specially...