Ratings & Reviews for Spyder Tarantula 2-in Carbide-tipped Non-arbored Hole saw
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise this hole saw for exceptional durability and cutting efficiency across tough materials including wood with nails, plaster, cast iron, and stainless steel. Many report teeth remain sharp after extensive use, with some noting success cutting through thick aluminum. Reviewers frequently describe it as the best they've ever used and highlight strong value. A smaller group reports failures under specific conditions, particularly with metal siding or concrete applications, with some noting carbide teeth splaying or breakage on first use. Overall, most customers consider it a dependable, high-performing tool.
Customer review summary generated by AI, including incentivized reviews.Awesome product
Would RecommendLove this product
From Tarantula 1-3_SLASH_4-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
Right tool for the job
Would RecommendBought this to drill a hole in stainless steel. It did it! And well! The pilot was more difficult than the main hole.
From Tarantula 1-3_SLASH_8-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
Cut through sink and still seamed undamaged,
Would RecommendDis cut throw thin metal, but slightly slower than I thought
From Tarantula 1-3_SLASH_8-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
Not tough enough for heavy duty cutting
Would Not RecommendNo
Awesome on wood
Would RecommendFirst Time User. Gotta say I am a fan Love the rapid eject I have my own hole saw kit but I knew I was drilling 24 3 in holes for the wife's new lights for deck I built for us. and wanted to start off with a new bit. cut 23 no problem pilot bit broke on 24th hole halfway had to wing it with a hammer and chisel the rest took me 2 hours to drill 24 3 in holes in solid 4 in wide true two in thick wood and 3/4 ply. I highly recommend.
Great
Great
From Tarantula 2-1_SLASH_4-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
not have opinion
Would RecommendI'm need in d=68.00 - 69.00 mm for plastic, aluminum
From Tarantula 2-3_SLASH_4-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
Could be more durable
Would RecommendWorks well enough to do the job
From Tarantula 1-3_SLASH_8-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
Carbide-tipped Non-arbored Hole Saw
Would RecommendBest hole saw on the market as far as I'm concerned
From Tarantula 2-1_SLASH_2-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
Recommend
Would RecommendWorks great in 18 guage steel
From Tarantula 1-3_SLASH_8-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
Heavy Duty
Would RecommendI used this hole saw so far to cut through 2x8 trailer flooring and found it very sharp and effective. The depth is good too - you can get through more than 1 1.5" thick board with room to spare. Not so easy to remove the wood plug from, but I've struggled with every hole saw I've owned in this respect.
From Tarantula 3-1_SLASH_2-in Carbide-tipped Non-arbored Hole saw Verified Purchaser
Hi there, thank you for taking the time to provide your valued feedback. We will include your input when reviewing potential design improvements for ...