Ratings & Reviews for Smart Screen Aluminum K Style Pair (Left/Right) (5-in x 20-ft) End Cap 5-Pack

Screws are not self-taping need to drill material

Seem to be made well but takes longer than necessary to install due to screws provided,

Aluminum gutter guards

Easy installation and it came with self tapping screws

0NLY USE STAINLEES STEEL OR ALUMINUM SCREWS

RAIN GUTTER GUARDS ARE MADE VERY STRONG,THEY SENT 140 STEEL WRONG SCREWS

Worth the wait ..,

Due to supply (aluminum) shortages I waited several months to finally receive my order of Smart Guards for my gutters. My research suggested these leaf guards were the best preforming and were reasonably priced. Thus far they are preforming as advertised, the leaves generally blow off with a light wind and the perforated cover captures the rain flow easily. Highly recommend!

Would and will buy again

Put these on the front of the house today and I have to say I was surprised by how thin they are. Arrived bent on the ends and I can see why. I would buy these again to finish the rest of the house as the holes in them are small enough to keep anything that comes off the trees around here out of the gutters. I don't see it being any good for Pine needles though. Fortunately I don't have to contend with those. Your given the exact amount of screws needed and not one more, so I would suggest buyi...

Cleaned Gutters for the Last Time

The hardest part of the installation is cleaning out the gutters. Time to install sections about 5 minutes each including moving the ladder.

Well worth the price.

The product was as described, very light yet sturdy. Was installed with not much effort. Our son did most of the work and we just supervised.

they worked

Once you got a good idea how to set them so they are going down hill as they approach the end of the gutter, all went well. Your screws for this item are worthless. They should be SS 3/4"self drilling, so what if it adds $1.20 to the cost of a box

Design could be improved.

Installed 240 feet. My gutters are subjected to leaves from many trees. The quality of the material is excellent however the design could use some improvement. Using the clearance hole for the mounting screw requires pre-drilling 1/8 hole in each. This leaves very little material between that hole and the edge of the under-turned material. I opted to use one of the drain holes instead. When it comes to mounting to the facia, it would help if the manufacturing tooling could be modified to include...