Ratings may include incentivized customer reviews.
What Customers Are Saying
The product is described as an effective pipe thread sealant that can reliably stop leaks across various types of fittings and connections. It is praised for its easy application, thick consistency, and ability to work on both metal and plastic components. While a few negative reviews suggest it may not work as well in some cases, the overall consensus is that the sealant is an excellent and time-saving solution for plumbing projects.
Customer review summary generated by AI, including incentivized reviews.seals really well
Would RecommendThis contains snthetic fibers and mineral fillers fior better sealing properties. I was installing one inch threaded brass fittings and using tape, first pink, then gray, with no luck getting a good seal. I did some research and bought this. It sealed up perfectly well, no drips! It is very thick and easy to apply. I didnt know how much to use, so i just applied a small amount and carefully spread it, making sure it filled all the threads. After completion I wiped away the excess and all is neat...
It’s a bit messy.
Would RecommendIt seemed to work well. Easier to use than Teflon tape. Not leaks so far!
Verified Purchaser
Worked great!
Would RecommendHad small leak at threads of my polypropylene pipes no matter how many times I adjusted the rubber gaskets. Put some of this on all my pipe threading and within 5 minutes of application all the leaks were gone.
great product that works for both water and gas
Would RecommendWorks as described and seems to be of high quality
Verified Purchaser
Pipe thread sealer
Would RecommendWhite pipe thread sealant. No drama. Worked exactly like it should have.
Verified Purchaser
Worked
Would RecommendNo problems, fixed a very slow seep that tape alone wasn't stopping
Verified Purchaser
NOT the best choice for plastic fittings
Would RecommendAlthough this is rated for plastic fittings, RectorSeal No. 5 is a much better choice because it does not contain Teflon lubricant. Teflon is great for helping achieve the proper torque on metallic pipe with less effort--but it promotes over-torquing on plastic joints, making them prone to stress-cracks. Non-lubricating sealants are always recommended for plastic threads.
Sweepstakes
leaks gone
Would RecommendI had metal-to-metal threads, and teflon tape would leak no matter how tight I went. Guy at lowes recommended this with teflon tape combined, and it worked even when I didn't tight it up all the way... nice. Love it.
Verified PurchaserSweepstakes