Ratings & Reviews for ROCKWELL 3-Pack High Speed Steel Oscillating Tool Blade

Am I using this blade wrong?

I'm using the blade to cut 5mm subflooring. In building a portable stage backdrop; I attach the 5mm subfloor sheets to a tubular steel frame lay the blade against the steel tubing and cut out windows, door openings, excreta. At the door openings I'll have attached 1x1 drywall corner bead and the blade will hit the corner bead, any how I've burnt up 2 blades cutting 10 openings.

long lasting and smooth fininsh

[This review was collected as part of a promotion.] Have used on a number of different materials including bamboo flooring and the quality of cut and finish were excellent

Perfect for small jobs!

This worked perfectly for the small space I had to work in. It did not dull quickly like other brands I have purchased!

Don't drop

I have had this set several years and finished many jobs without any trouble. I was changing blades over a hard floor and dropped my metal blade and it snapped like it was glass. The trouble was me not being careful enough because I was not aware how brittle these can be. Just a warning if you buy this tool be careful and you will get a lot of use without a lot of waste.

A blade for a wonderful tool

I purchased this today and am anxious to try it out.I purchased my Rockwell Sonicrafter six months ago for a project where I had to trim the skirt of my guest house. I had wracked my brain trying to figure out a way to have a slow controlled trim and the Sonicrafter worked great at following a pencil line. Since the blades have measurement, I measured the depth of the skirt (3/4 of an inch) and painted a yellow stripe on the blade. As I used the Sonicrafter, I was able to have complete control w...

not what you get

This item is mislabeled, what you will really get are 3 high speed steel blades not carbide blades.

Not a Durable Product

The mount split on this blade While undercutting some door jams, Pine by the way! I have a Fein Multimaster, blade fit well, but one side of the mount split within five minutes! Everyone is trying to copy the Fein designWith pretty pathetic results it seems. Why you don't carry a full line of Fein accessories, which are far superior to every other brand, totally blows my mind!

Not as advertised

This product was on sale at a very good price. It claims to work on a Porter Cable device. I have a Porter Cable PCE605. The blades do not fit properly because they have rectangular holes and the porter cable has round holes so the blades do not seat properly. I was able to drill round holes to make the blades fit but it was time consuming.

Right blade for the job

I purchased these replacement blades for my Rockwell tool and am very pleased with the results. I felt the price was a little steep, but would purchase them again due to the performance.

Easy to use. Handy for difficult angles. Even an amature like me can use for projects that seems too difficult. Glad I have it.

Good option for quickly trimming wood

These blades cut through wood much quicker than the wood/metal blades, just be sure not to hit a nail with one otherwise they are destroyed quickly.

wouldn't cut paper

Tried to use these blades to trim 3/4" plywood, after many minutes of no progress switched to a dull bimetal blade that finished the job in no time.

Won't Last

Bought a pack of three blades can only cut two notches before blade starts smoking and then it quits cutting I am cutting 2x6x10 pine should last much longer