Ratings & Reviews for Lutron Maestro Fan and Light Control 1.5 -Amp 4-speed Touch Fan Control Ivory

Switch Over-Current Fault when Lights and Fan On

Nice product if it worked. Lights worked aside from the GE LED Bulb flickers if the bulbs were dimmer than 75% (post adjust procedure). If the fan was turned on from a dead stop the switch would click and reset every second or two until it was spinning. The fan only draws .8 amps so it was well within spec. If the fan was stable and I turned the lights on, the switch would start clicking and resetting every couple seconds. Turning the lights off again didn’t stop the clicking. Removed/returned...

Know what you are buying. My bad

Not clear on the package that you need a controller in the fan. Couldn’t find the other part I needed on the shelf either? Would have worked otherwise.

Works as intended

This switch is awesome. Works my fan and lights on separate switches with separate speed/dim control, and only occupies one gang box. It has built in light indicators that show you where the fan and light speeds are. The installation requires a 14/3 wire. It looks really nice and neat, and I got three of them installed in 3 of our bedrooms.

Awesome Switch

This switch is exactly what I wanted. I didn't want a remote or have smart home capabilities. I just needed a switch that would control the light and the fan separately, and also allow me to control the dim/speed of the fixture. This does exactly that and it's very convenient. Highly recommend this product.

Great Product but failed in 2 years

Worked flawlessly but failed after two years. That was one month after the extended warranty of two years by registering the product with Lutron so they could gather all your information to do who knows what with. Very disappointing to pay $59 for this to work two years.

Total Control

This is a great control like all of the Lutron (have some over 10 years old) products are, works like a dream with fan and light. As usual with wiring this control you must turn off the power, but don't short a GFI receptacle in the process of identifying the correct breaker. That cost us.

Works well with LED bulbs.

Easy to install. Works well with ceiling fan and 2 - 100 watt led light bulbs. No adjustments required. Dimmer feature works as expected.

Easy to install.

If you have the necessary wiring already to box the install is super easy.

Excellent!

Installed four to replace dual slides. Love that we can set the levels and that it automatically returns to that setting when we switch on.