Ratings & Reviews for Krylon Fusion All-In-One Matte Vintage Rose Modified alkyd Spray paint and primer in one ( NET WT. 12-oz )

WASTE OF MONEY AND TIME

absolutely terrible paint 5 coats and still will not completely cover white.

Horrible

Horrible. Super spotty application. Runs like a sprinter in the olympics, like water with some dye in it. For someone that uses a lot of spray paint for work, never again will Krylon be purchased.

Horrible paint!

Horrible paint! Runs, thin takes 4 coats to match lid color! My husband painted cars for years. He knows what he’s doing. After sanding and preparing the farm gate, he started to apply the paint. Terrible! TERRIBLE!!!

Covers great

[This review was collected as part of a promotion.] Way better than rustol.... this stuff covered surfaces not advertised. Couldn't be happier. My new go to paint

Perfect paint

[This review was collected as part of a promotion.] I purchased a few cans last week to paint my models for my train set worked great. The colors really bring out the features in the models.

Good product -dry times temp & humidity sensitive

Overall I’ve been satisfied with this paint. Have used to gloss black for refinishing frame and roof supports on my golf cart build. Also used the satin on plastic trim and bumpers. Product is sensitive to humidity and Temperature. Expect long dry times in cold and damp ambient conditions. No too bad on hot dry days. I tried putting a clear protective coat on some parts after and had the parts all craze up. Had to do a lot of sanding to get back to a point of refinishing again. Not sure if t...

Does not dry!

I purchased for a pinewood derby car my son and I were working on. We painted it in with 2 light coats to get a nice even coverage and 12 hours later the paint is still tacky. We waited another 12 hours and we still have handling marks in the finish. This paint is complete garbage.

Krylon Fusion spray paint

Bought a can and the nozzle was clogged and paint dripped out. Bought a second can and it took quite an effort to get it going then it came out full force. A third can was same - needed to reposition my thumb to force it out.

Disappointing - Last can I ever buy

I've worked with regular Krylon before with good results on metal and wood. This time, I needed to spray paint two small enclosures made from cut and bonded 1/4" acrylic sheet. I decided to buy the (black gloss) Fusion variant even though it's more expensive than the regular type because it's advertised as suitable for "difficult surfaces such as plastics". Painting the first box went well although the paint went on thin and unevenly plus it runs very easily if you apply even just a little too ...

Goes on smooth, and each cam matched very well

I painted my truck using a spray can, the results speak for themselves.

Not as good as the original Fusion paint

Used up my last can of the original formula Fusion paint (great stuff, should have purchased more while available). purchased this newer formula Fusion all in one, but nowhere near as good as original, slower drying and more runs.

Horrible Nozzle

This was not cheap spray paint. The nozzle does not work and keeps POPPING OFF??? I can’t even get the product out because they cut corners on the hardware. What a train wreck.

Extremely hot paint

Ive been painting for 30 years on and off. Bicycles, woodworking. Cars, appliances, furnace and models, you name it, Ive painted it. I had this small Abs plastic boat and I was familiar with the fusion for plastic. I don’t know if this is the same formula. I gave this boat hull a light scuff and sprayed 2 coats 15 minutes apart. This paint goes on extremely heavy and It is difficult to get a light coat. It also behaves like enamel which I do not like based on drying times. The solvent in this pa...

Worst Spray Paint Ever!

I am an experienced painter. This KrylonFusion All-in-One is absolutely the worst spray paint I have ever used. It bubbles, drips and does not adhere to the prepped and sanded surface. I am trying to refinish a childs kitchen for my granddaughter. I sprayed the first coat. waited over 48 hours even though the can states recoat before 6 hours or after 24 hours. The second coat ruined the finish. I had to sand and scrape the bubbled finish., wait another 48 hours and it does the same thing. Six ca...

Great paint - lousy cap and nozzle

I give the paint itself a 5-star rating for easy, great looking results. I give the cap & nozzle a 1-star. The cap was a bugger to get off which led quickly to the nozzle on both cans, breaking off at the stem where it enters the can. Used a 'Hammered Black' and 'Hammered Gold on a metal electronics enclosure, for a vintage patina look. Applied well using steady, light repetitive building coats with 15 minutes between coats, until the proper texture was achieved (which was fairly thick). ...

Worst spray paint I've ever used

Like the title says, this is the worst spray paint I've ever used. I only bought it because the store was out of the stuff I normally buy, and I'll never buy it again. It doesn't stick to what you're trying to spray. I'm an experienced woodworker, and after priming and sanding thoroughly, the paint wouldn't stick. I let it dry for over s week, sanded again, and sprayed again but the paint still isn't sticking properly. Absolutely garbage, completely ruined my project. Never again.

Not what I expected

1st can stopped spaying just as I started project. Could not get paint to stick to the plastic trim around my boats glove box plastic was thoroughly cleaned. I understand polyurethane is a hard surface to paint so, I gave it another try on an aluminum hatch trim. It spattered on the first attempt. On second attempt I got a reasonably clean spray. I’m letting it set for a couple of days before giving it the scratch test. Wish me luck

Really difficult to remove cap.

The cap was very difficult to remove. It took so much force that I wound up breaking off the spray nozzle rendering the product useless.

Total failure of a product.

1st issue was when shaking can, paint droplets started flying all over. It was leaking between the spray nozzle and the part that it attaches to. Wipe off paint can and started spraying and started dripping big drops on work piece. Couldn't push nozzle down any further. 2nd it says it dries quick to the touch. But after 24 hours could scratch the paint with my finger. Not finger nail, my finger. Bought another can thinking I could have got a defective can. Nope, did the exact same as the 1st...

Not good for all Ready to Assemble furniture

Taking the lazy and less costly route, I bought the Krylon Fusion to paint a laminate ready to assemble book case. The first coat bubbled and pulled away leaving large areas of the laminate color showing through. I have spray painted many projects so i know I applied the paint correctly. I waited an hour and tried a second coat, the finish is still very uneven with the original color still showing through in patches. Very disappointing.