Ratings & Reviews for Krylon Fusion All-In-One Matte Vintage Rose Modified alkyd Spray paint and primer in one ( NET WT. 12-oz )

Adhesion to HDPE is a problem.

No success yet, at least. I've tried cleaning with soap and water, light sanding of surface + soap and water cleanse, and light sanding, soap and water and then alcohol wipe down. Wiping the bucket with mineral spirts also did not work. The paint practically falls off. Still trying different methods and solvents. I know this paint to be very good otherwise. I'd love suggestions if anyone has them. thanks.

Reacted to base coat

I painted my project with the Fusion All-In-One paint and primer in white and let it cure for over 4 hours. I then masked off a section and painted it with Fusion All-In-One paint and primer in black. However, the black reacted with the white ruining my project!!

Scratched as soon as I placed things on it.

I used this product to paint a tv stand I have. Sprayed fine but I needed two cans for the coverage I wanted. I probably could have used a third. Let dry between coats and then over night and half the next day before I went to put my items back in place. No sooner than I did there was a scratch, the item is a wood item. I even used a protective coat to boot. Color was just what I wanted but I am disappointed that I have to repaint certain areas because of the scratches.

No Runs - No Drips - No Errors - No Good

Have extensive experience with Krylon products that I have always used with good results. Recently purchased Fusion All - In - One and found it very difficult to control. Came out of the nozzle far too heavy and the viscosity was far too thin. Could not get even coats coats and could not lay this paind down in light coats. It ran. Guessing I got a bad lot but I'm not sure. This is my first experience wiith Krylon Fusion. This isn't what I've come to expect from Krylon which has been an e...

Worst overspray

Color is nice and seems durable but thats where it ends. The nozzle is terrible. In order to get consistent coverage i had to hold the can pretty far back, which resulted in a red haze on everything within 6 ft of what I was painting. The duplicolor nozzle is much better. Now I need to take acetone to everything and hope it wears off my boots and washes out of my clothes

Krylon Fusion has won my vote!

I do a great deal of spray painting on a variety of surfaces and in spite of the care I have always taken to prep well what I am painting and then use paint that has been first, stored without extreme temperatures and secondly, very very well shaken, I still occasionally had runs or shiny spots remaining after 24 hour drying time... I have used 20-25 cans of Krylon Fusion in the last three months painting numerous objects. Each paint job has been amazing!!! No issues. Smooth as silk and the colo...

Fusion not worth it... buy the Colormaxx

I have bought several of these Fusion cans, but each one has either clogged, leaked, or had runny results. I am not a newbie to spray paint, I use them on projects all the time, first making sure the weather is agreeable, the object is primed(if needed), cleaned, sanded(again if needed), and the can is thoroughly shaken. Yet this product has continually disappointed me. A few cans sort of exploded while using, spraying out jets of paint like a punctured jugular vein! And of course, the retailer ...

Spit and sputtered

Bought 2 cans to paint a truck bed tool box after using 3 cans of rustoleum. Even shook the cans in my paint shaker and both cans spit paint and almost ruined all my hard work. I have used krylon for years but I'll avoid it now.

Clogs!!

Extremely frustrating to use!! Continued to clog after just a few sprays. The cap continued to fall off. Still have an almost full can but can’t use it! Have to go buy a new one- a different brand of course

Bubbles

Krylon metallic black stainless. Started bubbling as soon as I sprayed it on. Looks worse than it did before I painted it. I should have just used black paint. It sucks!

Love This Paint!

I have used the matte black on metal and wood and it has been fantastic - basically cures to a perfect finish. It is easy to use and goes on well without drips. I don’t ever want to use another spray paint!

Bubbles and crackles

After letting the first cost dry for three days I applied a second coat.... it became bubbly and crackled.... I sanded it down and tried again with the same result. Waste of time and money.

Bought Fusion 'Satin Brick'

Can cap color has a red tint. Paint color is basically brown. The cap color is what you want, but you don't get it.

Used on my sailboat mast.

Eight years ago I wanted a yellow paint for my mast. Have you ever been to a moorage where there are hundreds of boats anchored (Catalina for example)? When you're rowing around trying to find your boat in the twilight you're thinking that there has to be a better way. Anyway I went to my local car paint store and was thinking 2 part at the time. The guy behind the counter asked what I wanted to paint and he immediately suggested the Krylon Fusion. Said that one of his customers was an awning ...

Fusion spray paint

Fusion brilliant gold isn't brilliant at all. There is nothing brilliant about this new spray paint. Has a sheer appearance on our pieces with gray undertones. Very disappointed.

BEST PAINT THUS FAR

Out of all of the paint that I have used so far Krylon Fusion ALL IN ONE is THE BEST ...I would like to say that it is affordable and economic, it is readily available it can be purchased at a few local stores, it has very good opacity and it can blended flawlessly, what I love the most is the very fast dry time, this makes a world of difference when I have multiple projects or projects that requires multiple layers.

BEST PAINT THUS FAR....

Im an Airbrush Artist of 31 years, out of all of the paints that I have used, Krylon Fusion All In One is BY FAR...THE BEST PAINT. I have mastered the art of decanting...I would like to say It is Economically affordable (the price is very reasonable for the quality, its readily accessible (it can be purchased at a few local stores), I love the spectrum of. Colors, it has great opacity and will also blend flawlessly. But most of all I love the incredibly short dry time between layers, this makes ...

Great for automotive use, high quality interior and exterior touch-up paint

I've used the 2702 Krylon Fusion gloss black paint as a one-step way to get gloss black interior trim pieces on one of my vehicles. For plastic, nothing beats this paint. As long as you sand, clean and wipe down the surface of any contaminants (isopropyl alcohol works great), lay down this paint in multiple coats separated by 1 minute between coats, and then let it dry for several days, it will last a long while! The key is to let it completely dry and cure over time. One more thing, the pain...

Fantastic for crafting and so much more!

[This review was collected as part of a promotion.] I have started using Fusion All-in-One bonding agent almost exclusively in ace of my craft glue! This stuff is powerful and will bond any surfaces you can think of. My husband is a master carpenter and he loves it for bonding melamine, wood,vinyl,plastics and rubber. A wonderful do it all product that is a must have in any home or workshop!

Best paint for plastic

I used this on a small table when it first came out. I didn’t prep it at all and 8 years later it Still looked good. No chips or discoloring. I have since used the rustoleum version on 8 pieces of rattan. It chipped within a year and requires constant touch up. I learned my lesson. Go with the original.