Ratings & Reviews for IRWIN Blue 0.165-Ton Steel Manual Material handling jack

Excellent 3rd hand

[This review was collected as part of a promotion.] I used the quick-lift to raise sheathing into place quickly and effortlessly, allowing me to do what would have been a two man job by myself. I attached a 1x4 to the quick-lift, using the supplied screw holes, to provide a wider support area for the sheathing. The quick-lift had a wide enough foot that it was stable with the extended support area. The quick-lift has screw holes on the base to attach it to a larger base if needed. I could hav...

Excellent Second Hand

[This review was collected as part of a promotion.] This product works as advertised! I used it to lift my leg press machine to get dolly's under it so I could move it by myself! Could not have done it without the Quick-Lift! Definitely invaluable when you need a helping hand!

AWESOME

[This review was collected as part of a promotion.] Great product. Precision lifting and lowering. Use it on every furnace installation. I uae it when attaching the return air ducting to the furnace. Gives you another set of hands, without actually having to se.d two guys.

A Must-Have Tool for Every Builder!

[This review was collected as part of a promotion.] I recently had the opportunity to try out the **IRWIN® QUICK-LIFT™ Construction Jack**, and I must say, it has been an incredible addition to my toolkit! From the moment I unboxed it, I was impressed by its solid construction and durable materials. This jack feels built to last. The standout feature for me is the quick-lift mechanism, which makes raising and adjusting materials a breeze. It significantly reduces the time I spend on setup, allo...

Definitely Buy

[This review was collected as part of a promotion.] I really enjoyed this tool! I have used it to help lift up an oven so Icould adjust the feet to properly level it and I used the tool to help me re-set a couple of doors the other day. Definitely need a 2nd Quick Lift to help hang the doors though so there is an equal balance supporting the door while doing the install.

Irwin Jack is a great 3rd Hand

[This review was collected as part of a promotion.] The Irwin Quick-Lift Construction Jack is a great, durable, well built tool. That comes in handy with many tasks. I used it to help hold a gate in black while I attached the hinges. I wish I had two of them.

Heavy Lifter

[This review was collected as part of a promotion.] I used the Irwin Quick-Lift Construction Jack to replace a caster on my workbench. The jack lifted my workbench easily and allowed me to change the caster without the hassle of turning my workbench on its side. This Quick-Lift jack will come in handy for future projects around the house including kitchen cabinets, leveling appliances or replacing broken feet on furniture.

Great for odd jobs around the house

[This review was collected as part of a promotion.] Don't have help leveling appliances? Did your pet push its toy under the furniture? The Quick-lift is great for around the house. It easily slides under furniture, appliances or whatever you need to lift. It effortlessly lifts them amd hold them in place. Ruggedly built and great finish quality. Love that they have previsions so you can screw it to struction for construction uses.

Not just for construction

[This review was collected as part of a promotion.] This came at the perfect time when I was doing rough framing and needed to spread studs. The ability to spread and get both hands back to work with was invaluable. After using it on the construction site I also found some things on the farm to use it with. I often work alone and this helped me get things done faster when I needed three hands.

Way better than expected

[This review was collected as part of a promotion.] Have used it on numerous jobs to lift a variety of heavy equipment. Lifted a 250lb refrigerated sandwich station so I could replace a wheel, a walk in cooler door, and an AC condenser with ease. It’s awesome

Superior to generic jacks.

[This review was collected as part of a promotion.] The Irwin Quick-Lift Construction Jack is a great tool with some caveats. I tend to use a jack for mostly outdoor construction projects. Previously, I used an automotive jack, and the problem is those jacks are not designed to lower a structure all the way to the ground. This limitation required me to dig a hole into the ground, to lower the lifting surface enough to make-up for the height of the jack. The Irwin Construction Jack, however, has ...

Small but mighty

[This review was collected as part of a promotion.] I liked this from the first time i jeard about it. I usually work alone a lot of the time and sometimes need a second hand whether ot be holding or lifting. With this set at lifting 300lb it has many possible uses. With a couple of them you could set upper cabinets off of the lowers. Need to adjust appliance feet no problem, well maybe some of the bigger fridges might be over the weight limit.

Great for making heavy lifting tasks easy

[This review was collected as part of a promotion.] As an electrician, I often have to lift and mount large equipment like disconnects, junction boxes, etc. This tool makes that job so much easier when I’m working alone. The small adjustment for raising and lowering allow for very precise leveling with no effort, and allows it to be done safely as well.

Good for certain jobs, I need to try it longer

[This review was collected as part of a promotion.] I have been wanting to try this jack ever sense it came out. I was very happy when I received it and could not wait to try it. I used it to help hold up a heavy swinging dining room door and it worked well on that, I also tried to use it on snapping flooring together and it was kind of bulky and the lip on the top jaw was beveled and wanted to ride up over my thinner flooring, it would have been better if the jaw was square and would grip bet...

Gonna come in handy!!!

[This review was collected as part of a promotion.] Great well built tool!!! Love the ability to raise and lower with ease! Plan on purchasing another one to make door installations a breeze for one man jobs. Already found a use for it to raise the mower to be able to access the deck belts! There will probably be a million more uses going forward!

Multiple uses and sturdy product

[This review was collected as part of a promotion.] I wanted to wait to use this on multiple projects as most of us have many at one time. We had two small bedrooms to put in plank flooring and the edge of the construction jack is thin enough to get a proper fit on the edge of the flooring. We made great use of it there. Second project was a reather large, cumbersome, shed door that was difficult to level due to many factors. This Irwin construction jack did the job and helped get the fit we nee...

Decent Jack

[This review was collected as part of a promotion.] I do a lot of repair work, and was needing something that would lift and hold things in place, and also to separate or spread apart assemblies to be able to get parts in and out. Build quality is about what you'd expect from a well known company like Irwin, and little disappointing that you only get one jack per box. The head or lifting end is configured so that all you need is a gap maybe 1/8 to 1/4 inch to get the jaws in place (and yes, I'v...

Not Just Windows and doors

[This review was collected as part of a promotion.] Just got done with a standard window install and worked great, but then had a flat tire on the power washer, oh where is my jack, never mind Quick lift to the rescue. This picked up my power washer so I could do the tire repair. This is going to be a great multipurpose tool.

Great tool

[This review was collected as part of a promotion.] I received this beast of a tool and put it to work immediately. I had a 6 foot wide older barn door that was falling off the hinges. The door is too heavy to hold up by yourself and remount the hinges without having to up a pulley or brace. So as soon as I received my lift I put it to work on raising the door without having to use any other system. The lift worked wonderfully with a board underneath to level out the balance and the durability ...

Strong & steady

[This review was collected as part of a promotion.] First use, installing solid core doors to it’s hinges, strong and steady with great micro precision and yes it was a one person install. Second use, tried something a little different I used it as a board straightener on a mahogany deck 2x4 and the IRWIN quick-lift up against 2x joist and mahogany decking and press away worked great. I’m sure I will fine many more uses for the tool