Ratings & Reviews for IRWIN Blue 0.165-Ton Steel Manual Material handling jack

Perfect for leveling

[This review was collected as part of a promotion.] Used 4 times now for leveling cabinets and twice leveling appliances. Works perfectly and with minimal effort. The large base and tongue allow me to get under the cabinets easily without damaging doors. Going to need 3 more!!

Irwin Quick Lift- a universally useful tool

[This review was collected as part of a promotion.] The overall construction has a very solid feel. The handle/grip is ergonomic and easy to operate. The quick release lever is located in a place that’s easy to access however doesn’t get accidentally tripped when lifting (a great safety function). The 10” /330lb lift capacity is enough for just about any of my projects. The low clearance and beveled edge of the lift base allows me to access underneath just about anything I would need to lift. O...

Robust and helpful

[This review was collected as part of a promotion.] I wasn’t sure that I would use this that often, but as soon as I started I can’t stop finding ways that it can help! Honestly, it’s a great third hand. I used it to support some cabinets in order to get them leveled. I also tried it’s a jack to pick up a 200lb table top. It was easy to pump even with all that load. It is very sturdy and robust. It’s a great addition to my shop.

This is a must have product that you need.

[This review was collected as part of a promotion.] The Irwin Quick-Lift Construction Jack is just the product I have been waiting for, the ability to lift with ease up to 300#’s is more than what would typically be needed. I have already used this to lift a work bench that was loaded down with weight but needed to be raised. I also used it to get under a freezer to adjust the leveling feet (that was so much easier), and lastly I needed to raise a rolling tool chest to adjust the wheel and lev...

Cool Combo of Farm Jack PLUS Quick-Grip Clamp

[This review was collected as part of a promotion.] This is a really interesting cross between the now-common quick-trigger-grip clamps that can also be used as spreaders, and an old-fashioned farm jack. It's always tricky to use the quick-clamps in spreader mode to lift something of any size or weight because of the small footprint of their pads and the limited amount of torque that can be applied to the plastic handle, as well as the fact that the release handle releases entirely at once - thi...

Durable and reliable

[This review was collected as part of a promotion.] QUICK-LIFT™ Construction Jack are made great quality and very durable . Very handy tool for quick lifting. The design is both sturdy and user-friendly, with a smooth, reliable lift that feels secure every time. One of the standout features is it’s impressive lifting capacity. This is a well-designed, versatile tool that delivers the kind of dependability needed for both small and large projects. Saves time! Highly recommended!

Like having a 3rd hand! Great tool!

[This review was collected as part of a promotion.] I use this quick-lift to level out a industrial bandsaw. This thing did exactly what I expected. Easy to use and extremely heavy duty! Just like having a 3rd hand, if you're trying to lift anything heavy.

Irwin Quick Lift

[This review was collected as part of a promotion.] It's tools like the Quick Lift construction jack that make me happy and relieved to be around during this day and age of tools. The simple novelty of a strong enough lift seems like it's something that should have been around forever. However, it hasn't and to say that this option came and just the right time is an understatement. Irwin really outdid themselves with the rigid construction characteristics of this Quick Lift tool. The base plate ...

Awesome device for an extra set of hands

[This review was collected as part of a promotion.] This device is one of the more helpful things I have come across in a while. At first glance, you might think that this is maybe a bit light weight looking...or that it wouldn't be that helpful... But I am here to tell you that you would be wrong. As soon as I held this Quick-Lift tool, the weight of it showed me that it meant business. The grips and all other aspects are very nice quality, typical of what I have come to expect from Irwin ...

Quick lift

[This review was collected as part of a promotion.] I used this quick lift jack to help lift the stove and refrigerator and re-level them. I also found that it makes a great second set of hands when tailing long stock on the drill press and scroll saw, as it is quick and easy to adjust.

Versatile and Easy to Use

[This review was collected as part of a promotion.] This nifty tool has interesting use cases. First, it is beefy and feels solid. Squeezing the handle to extend the lift is smooth, and the smaller handle to slowly lower is just as smooth, making it easy to engage and disengage the lift while using it. My only gripe was the smaller "release" lever, which was harder because it didn't seem long enough to apply the needed force easily. Over the past month, we have used it many times for installati...

My new favorite coworker.

[This review was collected as part of a promotion.] Super simple and easy to use. Very sturdy, stable, and confidence inspiring third hand, Worked flawlessly for lifting an out of track elevator door to realign it with its track. In the future will definitely be using it too lift and level off smaller controllers, door bucks, and anything else I can find.

Great extra hand

[This review was collected as part of a promotion.] Great tool to have on hand for helping hand. The tool is capable of lifting 330 lbs and 10 inches of lift. I found it useful for kitchen cabinets and doors. The tool provides holes to secure it if it needs ti be. Has a trigger to pull that allows lift to increase and a switch to lower it.

Great product would definitely recommend

[This review was collected as part of a promotion.] Used to hold up doors while taking them down and putting them back up. I was able to adjust them up and down to get the hinges lined up to put them back on It’s was extremely help while taking them down needed no help holding them up during the whole process. They worked great in lifting furniture to get rollers under them to move them.

Quick-lift

[This review was collected as part of a promotion.] Used it to help lift some cabinets and steel doors up to the correct height for install. Not having a helper at the time the quick lift became my helper and I made quick work of installing what I had to without help.

Excellent Adjustment / Positioning Tool

[This review was collected as part of a promotion.] The Quick-Lift Construction Jack is and excellent tuning tool for all things you just can't do accurately and reliable with normal clamp style tools. I had been eying this the Quick-Lift Construction Jack ever since it's release and very happy to have one. -Construction: This thing is rock solid metal construction throughout. It will handle anything you throw at it and then some. I don't worry about it's ability to handle the weights I thro...

Game Changer for Construction Projects!

[This review was collected as part of a promotion.] I recently purchased the iQUICK-LIFT™ Construction Jack, and it has completely transformed the way I approach my projects. This innovative tool is a must-have for any contractor or DIY enthusiast, personally i am a cabinet and furniture maker. Ease of Use: The setup is incredibly straightforward, allowing me to get to work without wasting time fumbling with complicated instructions. The jack lifts with impressive speed and stability, making ...

Quick lift supreme!

[This review was collected as part of a promotion.] My crew used this to lift sheet rock to a desired height for installation & also it was used on the flooring. In both occasions it outperformed any & all expectations. They were able to hold sheet rock up a 1/4” for installation & as the customer requested for this section of walls have the flooring underneath it. It jacked the flooring precisely & made a perfectly tight fit. They even jacked up the corner of my prefabricated shop to level it b...

Best helper

[This review was collected as part of a promotion.] The Irwin quick lift is the one of the best tools to have especially when you're alone and have to do a door/window install. I had the pleasure to put this tool to the test when have to place a new piece of sheet rock up that was fall apart due to a leak from the plumbing from behind a washer, i removed the trim and old drywall sheet and place the lift under to hold and let me tell you it was easy then doing it myself. What i really like it t...

Great features compared to another brand.

[This review was collected as part of a promotion.] I already own one of these from another manufacturer. In comparing the 2, Irwin has made some great improvements. I really like the 4 leg base, the base is much sturdier and has a larger foot print then the other brand. The lifting base is a little longer as well. The beveled screw holes in both the base and lifting plate provides more options for lifting and securing the Quick-Lift. The arm is longer so it provides about 2" more lift than the ...