Ratings & Reviews for Grip-Rite PrimeGuard Plus #9 x 3-in Wood to wood Deck Screws 360 -Per Box

Worked Great

Have a 26 year old deck that the nails are coming out of the wood. Have to pull the nails and replace them with a deck screw. The countersink well and the course thread was a plus in pulling some of the crooked boards back into place. As the nails are affected by the sun and pull slowly out of the wood, we will no longer be hammering them back in. We will use these screws to repair the deck. Any further decks that we build will be screwed together and not nailed.

heads dont strip out

i used the whole box and didn't lose not one due to stripping out the heads

Very good product and it works every time you use it. It is very hard these days to find something that is that reliable.

Torx head doesn't slip like Phillips head screws do!!!

They do the trick

I went through the whole box of these building my shed and never had one strip or give me a problem.

Best on the market

I've been using this cream is for several years now they're the best on the market.you can use them several times vitamin list on the head will not strip.

Easier to predrill starter hole

I am a lady and it was much easier for me to predrill the hole just deep enough to get it started.. Seemed difficult for me to get it to catch the wood without a predrill.

Easy to use

I bought these to frame in my basement and love the way they work. They screw in very easy and are long enough to hold without getting your hand in the way.

Robust fasteners well worth the extra cost...

I rebuilt my 14' X 12' deck using these fasteners and I was amazed at the finish and strength of this product. The overall strength of my entire deck improved using these over the twisted nail type they replaced. The star head was superior to any phillips head type in regards to ability to handle torque and a secure feeling while driving them into the wood without feel of sliping out and marring the deck finish.

Great screws

These screws are easy to drive with the torx head.

Can't go wrong with screwing it!

The best screw for just about any framing job. Pulls everything tight. For the DIYer, Pay the extra money and use screws in place of nails for your stud walls, joist w/ hangers or without, etc. You want be disappointed.

Great product

I like the T25 head because the driver does not slip.

Never use drywall screws (except for drywall)

These screws converted me. If you're using drywall screws for wood assembly, STOP! They're brittle and not made for stress. They can snap under load. These screws have high tensile strength, plus the coating is superior against corrosion. They're easy to work with, too. They start self-drilling and go after a couple of turns. They go right thru treated lumber, no stalling. These are well worth the marginal price difference. The only "con", you need star driver tips. They supply one, but make sur...