Ratings & Reviews for DeckForce by Grip Rite Deck Force #9 x 3-in Composite Deck Screws 321 -Per Box
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise these screws for exceptional performance on composite and wood decking, highlighting strong holding power, clean self-countersinking heads, and a flush finish that blends seamlessly. The T20 star drive head engages easily and resists stripping, while sharp threads allow smooth insertion with minimal effort. Many appreciate the color match and durability across outdoor projects. Some note the included bit wears quickly and recommend purchasing a higher-quality alternative. A few report hole stripping if driven too quickly or with insufficient screw length. Overall, most customers find them reliable and professional-looking despite minor technique considerations.
Customer review summary generated by AI, including incentivized reviews.Pre-drilling works best
Would RecommendGoes in smooth
From Deck Force #9 x 3-in Composite Deck Screws 64 -Per Box Verified Purchaser
buy slightly longer than you normally would
Would Recommendthe left hand threads at the top have a tendency to cause you to strip out a hole too easily, unless you buy them minimum 1/2" longer than an ordinary construction screw you would use for the same project. the threads also destroy composite if you ever try to back them back out once they've been counter sunk.. they look good though
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 74 -Per Box Verified Purchaser
Good decking quality
Small head counter sinks itself, easy to work with.
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 371 -Per Box Verified Purchaser
Noyhing
They did what they are supposed to do
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 74 -Per Box Verified Purchaser
Hard to grip
Would Not RecommendOften, the screw didnt grip very well. When I tried to take it out, it would just spin.
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 74 -Per Box Verified Purchaser
bad screws
Would Not RecommendThe reverse thread creates more problems than help. These screws drive in and spin about half the time, every screw needs countersunk with a drill bit, waste of time. needs redesigned.
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 742 -Per Box
Doesn't sink well
Would Not RecommendThese screws are hard to get started and do not countersink well. When they stop biting into the wood, they will not go any further and are almost impossible to back out. The T-20 bit is not very hardened. I plan to return.
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 742 -Per Box Verified Purchaser
The bit fit and drove the screws as intended
Would RecommendGrab material great
These are terrible
These are the worst Trex screws I have ever used. You have to pilot hole them and 50% of them strip out before sinking far enough into the board for the head to be flush. I strongly recommend against using these as they will slow your project down immensely.
Deck screws
Would RecommendGood quality product
Look for a different brand!
Would Not RecommendThese screws are designed with threads that go in opposite directions to each other and cause numerous problems inserting and removing them. Why they designed them that way is beyond my comprehension!
From Deck Force #9 x 3-in Composite Deck Screws 64 -Per Box Verified Purchaser
Don’t pucker up
Would RecommendWonderful screws that don’t pucker up the wood
Good screws for composite decking
Would RecommendWe bought these to go with composite decking. I expect them to far outlast the nails use in the previous deck floor.
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 371 -Per Box Verified Purchaser