Ratings & Reviews for Dremel 1/8-in Rotary Tool Plunge router

Sturdy and well made.

Pretty nice little way to turn your dremel into a router for engraving and such.

Good for the price

This tool did make my project easier, however it could use some improvement. The plunge was jerky, but a drop of oil on the rods improved the movement. Maybe some bearings could make them flow better. The worst of the unit was the depth adjustment. This needs significant updating. It is not accurate and to dial in a specific depth is difficult. Trying to adjust the depth +/- a specific depth is almost impossible. The Dremel rotary tool is a go to tool for fine detail work, but the plunge a...

Easy to setup.

It was easy to setup and use. It also worked with Wen tool that I have.

Attachment broke my Dremel 3000.

The dremel 3000 has a horribly placed shaft lock for this attachment. If you have a 3000, make sure your shaft lock is fully aligned with the hole in the attachment and don't use your hand on the router (which by the way was the best way I found to get sufficient pressure on this), otherwise you can twist the dremel in the attachment. If your dremel twists, it will engage the shaft lock while your motor and shaft are spinning. Now my shaft won't lock in place to remove bits. Great design dremme...

It works but flexes

Cool little tool, not as accurate as I wanted.

Better than expected!

[This review was collected as part of a promotion.] Great router! Easy to use, good depth controls, and open enough to see your work. This is made it easier for me to get my projects done, and done better!

Detail Work

[This review was collected as part of a promotion.] Great little tool extension for doing detail work that would be much harder to do with a router. The template attachments are awesome!

Enjoying learning!

[This review was collected as part of a promotion.] I bought this awhile ago, as I’ve been teaching myself how to woodwork. It’s really a very nice way to teach yourself how to use a router.

Money Maker

[This review was collected as part of a promotion.] I have a small wood art shop and use my dremel plunger to help route out corners and create bevels in my cutting boards. It also gives me the flexibility to create personalized designs. Amazing piece of equipment!

Fun arts-n-crafts and small inlay tool

I bought this to give it a try on some fine detail inlay using thin stock, about 3/16" thick or less. It's been a fun little router. Dremel's smallest straight bit will cut some very tight inside curves, almost corners. Cutting flower stems and leaf veins is easy. Keep in mind, it is a Dremel. It is made for light duty work. I have 3 other routers of various sizes, one is on a router table and one is setup for a Milescraft circle cutter/edge guide. the other is a combination fixed/plunge. None o...

Not sure

I bought this thinking I could use it with my Dremel light my fault I did not check to see if it would fit so there it sits unless mar Dremel can make a attachment for the Attachment that will let me use this tool I just want it to drill holes LOL.

Great options

[This review was collected as part of a promotion.] I’ve used this several times to make signs. Works great.

Excellent for any job

[This review was collected as part of a promotion.] I was surprised at the precision and versatility of this attachment and how easily and swiftly I was able to complete a job that I had been trying to finish for months now.

Fits the Dremel Gen3 Model 595

I bought this after I saw one in use. Awesome for small jobs. I have a 30 yr old model 595 that wasn't listed as compatible but mine has the same threaded neck collar and it fit perfectly!!! Hope my little 595 keeps singin along !!

I thought of the price was fair.

Iliked it. It was simple to attach ane easy to use

Plunge Router 335-01

I purchased a plunge router 335-01 It stated on the box works with 100,200,300 and 400 series. I have a 380-6 Dremel. When I attach my Dremel to the Router as instructed it seems like a very loose fit. Does the plunge router work with my Dremel? I have not tried it yet as I do not want to break the plunge router. What do you suggest? Tried to contact via website e-mail 3 times and all 3 time the e-mail would not go through I am tired of trying email

Have a problem with the edge guide

The edge guide is sliding back by the guide rods despite the edge guide knobs are tighten, so there is no way to use it, that is a fault, what proceed to do?, what can I do?, without this edge guide the the plunger router attachment is useless to me.