Ratings & Reviews for Dremel Multi-Max 3 -Pack Carbide Oscillating Tool Blade

A Good Oscillating Blade to Have!

I received this blade about a month ago, and without really having any necessary projects that I needed to use this blade for, I instead performed a few tests with the blade. The Oscillating tool that I used to perform the tests with is the DREMEL MM35 Multi-Max Corded Oscillating Tool. The first test I used the blade on was a piece of treated 4X4, just simply cutting a few pieces out of it. The blade performed pretty well and didn't seem to be too affected cutting through the 4X4. Next, I did ...

Great blade

Have used this blade several time's for different projects. Have cut some bamboo flooring and the door jambs. Also used tk enlarge a slot in a plastic box. Has worked well. Will buy more for my toolbag. Dremel has provided me this product in exchange for an honest review.

deff worth the money

it did what i bought it for

Good for all around DIY

This blade works great for cutting wood and the occasional nail or staple you may encounter around door jams while laying flooring or other indoor projects. After using it for a couple weeks I held up fairly decent and gets the jobs done. It is a little better than the non carbide blades by Dremel but not a major improvement overall. It can cut nails and other hardened objects easier and can last a decent amount of cuts if not forced through the material. I did try to cut some rebar and it barle...

Multimax Cabide Blade is great

I thought the Mutltimax tool was good, but with this carbide blade they have gone beyond and made my Multimax an even better investment.

Super Blade

Dremel has provided me this product in exchange for an honest review. I have used this blade in my high school woodshop. If you teach you will understand the use and abuse tools go through in a shop class. This tool held up in my shop. The blade stayed sharp longer than I thought it would. I would recommend this blade for the casual user as well as on the job.

Great additional blade

This blade cut through thick cycle seat post easily. great addition to my blade set.

Worked well for my application

I had to use this to cut through some mesh wire while removing some player walls. Worked for what I needed it to. Teeth were pretty worn after I was done but it got the job done Dremel has provided me this product in exchange for an honest review.

Excellent product, would recommend to others

Dremel has provided me this product in exchange for an honest review. I tried the MM485 blade on several applications and found it to be clean cutting, strong and durable. Compared the MM485 to several other manufacturers products and found it to be superior in staying sharp longer. Excellent quality

Repair hole in drywall from my teenage son.

Dremel has provided me with this attached in exchange of the most honest review of their product. My son had punched a hole in the drywall in his room ( who knows over what). It was a small job but it worked quickly with easy clean up. I was Able to make 4 straight cuts in the drywall with no sweat.

Great blade

• Dremel has provided me this product in exchange for an honest review. I tested the blade today on my lawn tractor. The hitch plate on the back had gotten bent and I was unable to straighten it out. It's approximately 16 gauge steel. The two sides had curled up. Still haven't figured out how or why, but I need to cut them off in order to use a new spreader I bought. I was amazed. I have a Dremel Velocity VC60. It cut through the steel like it was butter. The two cuts were about 2 inche...

Good cutting blade

Dremel has provided me this product in exchange for an honest review. I used this blade to cut a hole in dry wall for an electrical box. it cut like a hot knife through butter!! Tried to cut a fence staple but it had a little trouble with the harden steel in the staple. Cut easily into a piece of Corian.

Works well in wood

This blade cut well through oak, pressure treated lumber, and of course pine. I cut a piece of 1/4" copper tubing and it didn't cut as fast or as smooth. It wore the carbide coating off the blade. The test pieces of wood were only about an inch wide and 3/4" deep. So, 4 small cuts wore the blade out.

The MM485 Carbide Flush Cutting Blade are awesone

I am a carpenter by trad. I use my Multi-Max just about everyday. This Cutting Blade is buy far one of the better cutters I have use in my Multi-Max. I have used it to cut wood, Copper pipe, vinyl siding, aluminum soffit and even nails on occasion that was hidden in the wood trim in older houses.

Carbide is Tough

Dremel has provided me this product in exchange for an honest review. It is a tough blade with fine carbide teeth and universal fit. The test cuts through aluminum, PVC, and wood were quick and smooth.