Ratings & Reviews for Arnold 15-in Universal Fit (5/8-in) Turf Front Wheel for Riding Mower/Tractor

Good quality

The product was high quality unfortunately they were too big for my lawnmower. I returned them with no problem at all

lawn tires worked

Good tire and rim. Fit my Troy-bilt unit just fine

Not Universal Tire

Was told this was a universal tire. Don't know what universe. It would maybe work if it came with some bushings and or spacers. I ended up returning and ordered a wheel from the manufacture.

It works!

These tires and wheel work just fine. Just overpriced as far as I am concerned.

Front wheel/ tire combo

Had to return it. Tire was the correct item. But the hub spindle size was wrong

Arnold mower tire/wheel combo

Use your ingenuity here. NOT AN EXACT FIT! Some modifications are/will be required to make this combo work. I had to modify the washers/shims to make the wheel sit where it's supposed to by grinding the outside diameter of the washers to fit inside the hub on the axle shaft to clear the zerk fitting for maintenance. BIGGEST COMPLAINT= NO CAP FOR THE AXLE END AND PLASTIC GREASE (ZERK) FITTING!!! BEWARE!!! APPLY ADEQUATE GREASE TO AXLE BEFORE FINAL INSTALL!!!

Great price and met my needs.

I was looking for a less expensive alternative for a tire for my riding mower and this filled the bill. It is a good universal replacement.

Great replacement - might need 2 to keep level

Easy to install and a great replacement. I purchased the mower/tractor from Lowe's 2 years ago and one of the front tires started going flat. Replaced it with this tire only to see a 3/4" difference in height between the wheels making the front of the mower lopsided. So ended up replacing both front tires. Not sure where they get the 15" measurement since only about 14". Great replacement tire, just be ready or willing to purchase 2 to help keep your tractor level.

John Deere Riding Mower

worked great, good price and yes, also gave my military discount........that why i keep going back

Fit my 42" Cub Cadet LTX1040. It comes with 2 different lengths of spacers that have built-in grease fittings. You will need a floor jack, some channel lock pliers for the cotter pins but shouldn't take you more than 15-20 minutes per wheel to remove and replace.

Needed in a pinch. Otherwise wouldn't buy.

The "bearings" are synthetic bushings with grease-fitting-shaped nipples. They don't hold grease and there are no rollers. The "spacers" are one steel per side and a choice of two lengths of aforementioned bushings. There are no thin washer spacers. You will need to buy washers (18mm worked or 3/4” if you insist) to space them tight enough that the bushings stay in the hub as best as possible. Grease fittings didn't deliver to the entire hub anyway, I will need to remove and manually grease the...

Tire

It was round and it rolled. What else can I say abou a tire??

Replacement tires for JD Cart

These are great replacement tires for your John Deere Yard Cart. Easy to change and replace.

Tires are good but the plastic adapters might fail

The tires seem very good but the wheel adapters/bearings might fail. The grease fitting is difficult to attach a grease gun to. Since it is plastic, as it is molded to the plastic adapters/bearings, I had trouble shooting grease into it and I was afraid the plastic grease fitting might break off. Unfortunately, I will need to remove the wheels and apply grease manually as needed. The longevity of the bearings and the tires remain to be seen. I am saving the original wheels and mount the tire...