Setting on edge guard to apply 10# per 1,000 sqft

Our settings do not correlate with # per Sq Ft. 50-foot by 20-foot area (1,000 square feet), weigh out a sufficient amount of the product to cover this area, and use a low number on the spreader to apply that amount of material to the area of the lawn. You will need to do a 50X20 test area. Weigh out a sufficient amount of the product to cover this area, and use a low number on the spreader to apply that amount of material to the area of the lawn. If you have material left in the spreader after covering that area, it would be necessary to increase the setting a little bit for the remainder of the lawn. If you run out of material prior to covering the area, then you would need to reduce the setting a little bit for the remainder of the lawn. This method would work for establishing a setting for any product you are applying that would not have the setting on the bag for your spreader.