Prices, Promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.

Quick Set Lite 18 -lbs Powder Lightweight Drywall Joint Compound Bag

Questions & Answers for ProForm Quick Set Lite 18 -lbs Powder Lightweight Drywall Joint Compound Bag

4.7
610
See Product Details
30 Questions
30 Questions
Can this be tinted?


Can this be used on exterior plywood wall for a textured knock-down finish, then sealed with exterior acrylic paint?


Is there any difference in shrinkage or adhesive strength between the 5, 20 and 45 minute joint compounds?


Is the 210-minute version of this joint compound still sold? I see that the description says there should be a 210-minute version but it doesn't seem to be listed for sale on Lowe's or anywhere else.


Any issues with primer adhering to it?


Can this be smoothed out with a wet sponge after it’s fully cured?


I'm re-taping some ceiling drywall. Is this product only used for 1st coat, setting the tape, or can it also be used for additional finishing coats?


Recoat time is specified, but what about SANDING time? How much longer to wait before sanding is feasible?


Is this ready to use or do you mix it with water?


Is this product gypsum based?


Can this be used to repair damaged decorative lime plaster molding.


can this be used to fill gaps in Hardibacker board?


Can I use this as a skimcoat in a bathroom over drywall that has been taped and mudded with premixed all purpose joint compound?


Can this be wet sanded?


Can this be pre-mixed and stored? if so, for how long?


Can this product be used to skim coat plaster walls that are painted with latex paint? If so, what prep work is recommended?


should this material be used to fill seams and then let it dry before taping, or embed the tape in the first coat of compound


Can this be sprayed with a hopper gun as a small additive with popcorn?


Can I use this as a skim coat on a textured wall to smooth it out, then apply wallpaper over it?


Quick set 45 compound isn’t drying. Has been nearly 1 hr & 1/2 still not dry