Is this good for using a clear lacquer finish? If so, what nozzle tip should be used?

Hello, Unless it is a water based lacquer, the TC Pro cannot spray lacquer. Most lacquers are solvent based and are flammable. To spray that, you would need to get the TC Pro Plus (Part # 17N223). The TC Pro Plus is made to spray hot solvents. As far as what tip to use, it really depends on what lacquer you are using. Some manufacturers will recommend an orifice size for spraying their material. Otherwise, most lacquers can be sprayed with a 0.010” or a 0.012” orifice. Hope this helps! If you have any further questions please reference 156243 and give us a call 844 241 9498 M - F 7:30am to 5:30pm CST. Thank you, Graco Technical Service Group