Flex shaft Rotary Tool Attachments & Batteries

Dremel   36-in Rotary Tool Flex shaft

Tight spots, nooks, and corners they're all easily within reach when you add the 225 Flex Shaft attachment to a Dremel Rotary Tool. The Dremel Flex Shaft features a flexible 36-inch cable with a 5-inch bend radius, allowing you to comfortably reach your work in a variety of angles. The ergonomic comfort grip hand-piece reduces fatigue and allows for fingertip control to cut, grind, sand, sharpen, polish and more. The Quick Connect system makes it easy to attach to your compatible Dremel rotary tool.

Dremel   1/8-in Rotary Tool Drill press workstation

The Dremel 220-01 Workstation is a 3-in-1 tool; it's a drill press, rotary tool holder, and Flex Shaft tool stand. The Workstation is the perfect solution for stationary projects using your Dremel. Drill vertically or in any angle, adjustable in increments of 15 degrees. Hold the tool horizontally, up to 90 degrees; polish metal objects, sand different shapes, or grind metal pieces. The Workstation features an integrated Flex Shaft holder allowing telescopic adjustments to any height between 16 and 29 inches. The on-board accessory storage keeps your rotary bits organized and the cord management clips provide safe storage for power cords. The sturdy metal base with 4 clamping points securely holds your workpeice, while the base's inch and metric markings provide accurate measurements.

Dremel   1/8-in Rotary Tool Cutting kit

The 565 Multipurpose Cutting Kit allows for sturdy, controlled cuts in a variety of materials, including drywall, laminate, fiberglass, plastic and vinyl siding. The easy screw-on mounting system allows you to install the Dremel cutting kit to your rotary tool in seconds. The depth adjustment quickly sets correct cutting depth up to 3/4 inches deep. Kit includes a multipurpose cutting guide, two drywall cutting bits, and a multipurpose cutting bit.

Dremel   1/32-in to 1/8-in Rotary Tool Collet nut kit

Securely clamp your rotary tool accessories in your Dremel rotary tool with the five piece Dremel collet set. For use in all Dremel corded or cordless rotary tools the set includes the 480 (1/8", 3.2mm), 481 (3/32", 2.4mm), 482 (1/16", 1.6mm), 483 (1/32", 0.8mm) collets plus a Quick-Change collet nut so you can easily use a wide range of bits.

Dremel   1/32-in to 1/8-in Rotary Tool Mandrels

The Dremel EZ Lock makes accessory changes easy as PULL - TWIST - RELEASE. The one-piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. The EZ402 Mandrel is for use with exclusive EZ Lock Accessories.

Dremel   1/32-in to 1/8-in Rotary Tool Chuck adapter

Now have wrench-free accessory changes. The Dremel Chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal when the application requires numerous accessory changes.

Dremel   1/8-in Rotary Tool Plunge router

Turn your Dremel rotary tool into a compact plunge router with the 335-01 Plunge Router Attachment. Ideal for wood working projects to cut decorative edges, straight slots, route circles, inlay work, or rout freehand. The clear base on the attachment allows greater visibility of your work surface. Features a plunge lock-in handle for fast and easy plunge locking and two depth stops with quick release for rapid adjustment of routing depth. Also includes an edge guide and circle guide to rout straight lines and perfect circles.

Dremel   1/8-in Rotary Tool Mandrels

The Dremel EZ Drum™ mandrel makes sanding band changes easy as pull-place-secure. The one-piece drum mandrel design streamlines the process of changing sanding bands and makes it easy to sand flat surfaces and edges. The EZ Drum makes accessory changes 5X faster than using a standard drum mandrel. Compatible with all Dremel 1/2-Inch sanding bands (408, 432, 445)

Dremel   1/8-in Rotary Tool Right angle

Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 Right Angle Attachment. The quick connect system makes it easy to attach the 575 to the Dremel rotary tool, and the coupling system allows you to rotate the right angle drill attachment on the tool to achieve a perfect grip. Ball bearings and bevel gears provide smooth and cool operation.

Dremel   1/8-in Rotary Tool Mandrels

Mandrels are used to mount different accessories to use with your Dremel rotary tool. The 402 Dremel Mandrel features slotted screw head and a 1/8 In. (3.2 mm) shank. The 402 mandrel is typically used to hold accessories like cutting wheels and sanding discs. The flathead end of the wrench included in most rotary tool kits can be used to loosen or tighten the screw on the mandrel when doing accessory changes.

WORX   4-in Rotary Tool Charger

Meet the Worx MAKERX Hub, powered by the Worx 20-Volt MAX Power Share battery system, the little out-of-the-way power platform that operates all your MAKERX tools. We know that crafting and hobby work is all about the finer details, so we developed an entire tool collection that's ergonomically designed to be easy to grip and easy to maneuver. And the best way to make a tool lighter and more nimble, is to take off the battery. So we did. As a result, MAKERX tools are slimmer and more compact than similar tools already out there. And the Hub powers them all with just one 20-Volt Power Share battery (not included). Batteries are expensive, so you'll save a lot by powering every tool in the collection with just 1 battery. And we didn't want the Hub to get in your way. It's meant to keep a little distance from the project and its long, 4 ft. flexible cord gives you the room to move any which way you please. The Hub powers the MAKERX Rotary Tool, Angle Grinder, Mini Heat Gun, Air Brush and the Wood and Metal Crafter. And it uses the popular, high-tech, 20-Volt Maximum Lithium-ion rechargeable Power Share line of batteries to do so. Those batteries are the same ones that power all the tools on the Worx Power Share platform, tools like drills, miter saws, chain saws, string trimmers and lawnmowers. The Power Share platform has been around for a while now, providing a cost-effective way to grow a high-performance and reliable tool collection.

Dremel   1/8-in Rotary Tool Sanding and grinding guide

Burnt-on food and grime can be completely removed with the Dremel Versa extreme scour pad. The silicon carbide abrasive is great for the toughest cleaning tasks on hard surfaces. The multi-purpose surface can be used in wet or dry applications to clean grill grates and stove grates, rust from metal, oil/water/paint stains from concrete. Do not use on delicate or soft surfaces as they could be scratched.

Dremel   1/8-in Rotary Tool Debris shield

The Dremel rotary shield attachment provides a clear and simple solution for redirecting debris and sparks away from the user without interfering with the task at hand. The tool shield can be used with right- or left-hand grip positions and works to deflect debris on a variety of applications, including cutting, sanding, grinding and polishing. The shield can be quickly adjusted into position, provides easy access to the accessory without interfering with the workpiece.

WORX   4-in Rotary Tool Charger

The MAKERX hub serves as a multi-tool adapter to connect to tools in the MAKERX system including the hot air gun, airbrush, rotary tool, angle grinder, and wood and metal crafter.

Bosch   1/32-in to 1/8-in Rotary Tool Right angle

This attachment for a 12V Max Chameleon turns the drill/driver into an SDS-plus® rotary hammer, allowing the user to drill into concrete and masonry. The Bosch GFA12-H Rotary Hammer Attachment helps increase the versatility of the 12V Max Chameleon by providing more efficient concrete drilling. The attachment is compatible with the GSR12V-300FC and GSR12V-140FC drill/driver systems. With the GFA12-H attached, the GSR12V-300FC delivers up to 3,800 bpm and a maximum drilling diameter of 3/8 In. into concrete. The GFA12-H attachment expands the FlexiClick® 5-In-1 Attachment System, which also includes a keyless chuck, a locking bit holder, a right-angle and an offset attachment.

Dremel   1/8-in Rotary Tool Dust port adapter

A must have for any Craft and Hobby enthusiast. The Dremel 490 Dust Blower fans away dust for greater visibility to your work piece. By removing fine debris from your line-of-sight, the small air blower is great for detailed projects, sanding, engraving, and carving. The 490 fits on all rotary tools with a standard collet nut; can also be used with the 225-01 Flex Shaft attachment.

WEN   1/8-in Rotary Tool Mandrels

Remember when you could turn your own pens, The WEN Wood Lathe Pen-Turning MT1 Mandrel allows users to take on small and intricate woodturning projects. The self-centering mandrel attaches easily to an MT1 tail and headstock with the shaft running through the hollow live center of the pens body. This mandrel features five bushings, a 7 mm Dia shaft, and a tapered more to maximize compatibility. The universal design fits with the majority of MT1 wood lathes on the market, but was designed specifically for the WEN 3420 8 in. x 12 in. Wood Lathe. Remember when you could easily adjust the length and tightness of your pen-turning mandrel, Remember WEN.

WEN   1/8-in Rotary Tool Collet nut

Remember when you powered through metal with ease. The WEN 8-Piece Milling Collet Set helps make easy work out of a range of metals by keeping your bits tightly secured during operation. This set of imperial collets ranges in size from 1/8 to 5/8 of an inch. All you need is a set of compatible drilling bits, and your ready to mill. Compatible with the WEN 33013 Metal Milling Machine and the WEN 33108A 8-Piece 2-Flute HSS End Mill Set for Milling Machines. Sizes include one 1/8 in., one 3/16 in., one 1/4 in., one 5/16 in., one 3/8 in., one 1/2 in., one 9/16 in., and one 5/8 in. collet. Remember when you could take on the toughest metals. Remember WEN.