Rain Bird Drip Irrigation Filters & Regulators

Orbit   Hose Thread Drip Irrigation Pressure Regulator

The Orbit 25 PSI hose faucet pressure is engineered for drip and sprinkler applications where controlled low pressure is important for optimum performance. It is available in 3/4-inch female pipe thread (FPT) and female hose thread (FHT), as well as professional versions. It reduces dynamic pressure to 25 PSI while allowing you to maintain up to 5 GPM of flow. For dirty water, we recommend the 3-in-1 drip filter pressure regulator which cleans the water before passing it through the filter. The pressure regulator is compatible with controllers and valves from Orbit, Hydro-Rain, and other major brands. We recommend B-hyve controllers for optimum water conservation. For outdoor use with cold water only.

Raindrip   Hose Thread Drip Irrigation Pressure Regulator

Having trouble with emitters and fittings popping off your drip system? Excessive water pressure might be the culprit. Drip irrigation systems are designed to work with low pressure. With a pressure regulator in place at your water source, the water pressure is lowered and your problem is solved. The 3/4 in. FHT X 3/4 in. MHT pressure regulator comes preset at 30 PSI. Connects to 3/4 in. MHT outdoor faucet, hose bibb, or spigot on one end, and connects to supply tubing on the other end using a 3/4 in. FHT adapter (sold separately). The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the pressure regulator connects to a water source and lowers the incoming water pressure so your drip system can work with optimal performance. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Agrifim   Nylon Pipe Thread Drip Irrigation Filter/Regulator Combination

Get the right amount of pressure from your water source and filter out particulates that can clog and damage emitters with the all-in-one Pressure-Regulating “Y” Filter. This device reduces incoming water pressure to 30 PSI. The 200-mesh filter captures particles in the water; filter is removable for cleaning. The 3/4 in. MPT X 3/4 in. MPT device connects to pipe commonly used in underground valve systems and reduces water pressure to 30 PSI, which is optimal for most drip irrigation systems. The pressure-regulating “Y” filter is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors; filter is stainless steel. Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the pressure-regulating filter connects to a water source and lowers the incoming water pressure while also filtering out particulates that can clog and damage emitters so your drip system can work with optimal performance. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   Pipe Thread Drip Irrigation Pressure Regulator

When you’re connecting your drip irrigation system to a water source, don’t forget the pressure regulator. Without it, the excessive water pressure can blow out emitters and fittings, and damage your system. The pressure regulator lowers the water pressure to a set pressure so your drip system can work effectively—keeping your fittings and emitters in place, right where you need them. The 3/4 in. FPT X 3/4 in. FPT pressure regulator is preset at 30 PSI, and commonly used to connect an existing underground irrigation system with 3/4 in. MPT pipe to control the water pressure. Install with the directional arrow pointing in the direction of water flow. The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the pressure regulator connects to a water source and lowers the incoming water pressure so your drip system can work with optimal performance. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   Stainless Steel Hose Thread Drip Irrigation Backflow Preventer

Prevent impure water from flowing back and contaminating the clean water supply with the Anti-Siphon Backflow Preventer. Required by most local health codes when using a potable, and sometimes non-potable water source for your drip system. The atmospheric vacuum breaker has a 3/4 in. FHT connection which threads onto the hose bibb or faucet; 3/4 in. MHT connection on the other side to attach a timer, pressure regulator, or adapter for supply tubing. Removable filter washer blocks particles that can clog emitters. Use the directional arrow on the device to position in the direction of water flow. The Anti-Siphon Backflow Preventer is made of ABS with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. The Anti-Siphon Backflow Preventer is a check valve that allows water to flow in one direction and not in reverse, preventing unclean water from contaminating the water supply. Check with your local authority to find out what type of backflow preventer to use in your area. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   Hose/Pipe Thread Drip Irrigation Filter

Prevent emitters from clogging by blocking particulates in water with the “Y” Filter. This component has a 3/4 in. MPT connection point on both ends to connect to 3/4 in. FPT spigot or pipe, such as a sprinkler riser in the ground. Pipe threads create a watertight seal when screwed tightly together. To install, position the directional arrow in the direction of water flow. The “Y” filter comes with a 150-mesh filter that’s easily removable for maintenance; just unscrew the flush cap or cleanout cap, remove the middle housing, and pull out the filter to clean. The “Y” Filter is made of acrylonitrile butadiene styrene (ABS), and contains a polyvinyl chloride (PVC) washer with polyester filter, all treated with UV inhibitors Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the “Y” filter is an essential component for keeping particulates from clogging and potentially damaging emitters to help keep your system running smoothly. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   Pipe Thread Drip Irrigation Pressure Regulator

Drip irrigation systems are designed to work with low water pressure. When your water source emits high water pressure, it will be too much pressure for your system to handle. The solution? The pressure regulator does the trick—it lowers the water pressure and alleviates stress on your drip system. No more flying fittings or popping off emitters! The 3/4 in. FPT X 3/4 in. MPT pressure regulator comes preset at 30 PSI. Connects to 3/4 in. MPT pipe on one side (such as an existing underground irrigation system), and 3/4 in. FPT pipe on the other, or connects to tubing with a 3/4 in. FPT adapter (sold separately). The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the pressure regulator connects to a water source and lowers the incoming water pressure so your drip system can work with optimal performance. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   Stainless Steel Hose/Pipe Thread Drip Irrigation Backflow Preventer

Prevent impure water from flowing back and contaminating the clean water supply with the Anti-Siphon Backflow Preventer. Required by most local health codes when using a potable, and sometimes non-potable water source for your drip system. The atmospheric vacuum breaker has a 3/4 in. FHT connection which threads onto the hose bibb or faucet; 3/4 in. MPT connection on the other side to attach to 3/4 in. FPT pipe. Removable filter washer blocks particles that can clog emitters. Use the directional arrow on the device to position in the direction of water flow. The Anti-Siphon Backflow Preventer is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. The Anti-Siphon Backflow Preventer allows water to flow in one direction and not in reverse, preventing unclean water from contaminating the water supply. Check with your local authority to find out what type of backflow preventer to use in your area. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Orbit   1/2-in Polyethylene Push-Fit Drip Irrigation Male Adapter

The hose faucet 3-in-1 is a combination filter, pressure regulator, and drip adapter for micro watering applications where clean water and low pressure are important for optimum performance. It connects to a standard hose faucet or a hose faucet timer to form what is called a ”drip control zone.” A fine 150-mesh stainless steel filter is integrated into hose washer for easy cleaning. The compact pressure regulator reduces pressure to 20 PSI while maintaining flow up to 5 gallons per minute (GPM). The Drip-Lock adapter connects to 17mm or .700 inch drip blank distribution tubing. The 3-in-1 is compatible with valves from Orbit, Hydro-Rain, and B-hyve. We recommend B-hyve controllers for optimum water conservation. For outdoor irrigation use with cold water only.

Orbit   Hose Thread Drip Irrigation Pressure Regulator

The Orbit 25 PSI hose faucet pressure is engineered for drip and sprinkler applications where controlled low pressure is important for optimum performance. It is available in 3/4-inch female pipe thread (FPT) and female hose thread (FHT), as well as professional versions. It reduces dynamic pressure to 25 PSI while allowing you to maintain up to 5 GPM of flow. For dirty water, we recommend the 3-in-1 drip filter pressure regulator which cleans the water before passing it through the filter. The pressure regulator is compatible with controllers and valves from Orbit, Hydro-Rain, and other major brands. We recommend B-hyve controllers for optimum water conservation. For outdoor use with cold water only.

Orbit   Nylon Hose Thread Drip Irrigation Filter

The Orbit hose faucet drip filter is designed specifically for drip watering systems. It removes debris from the water supply and minimizes clogging in drip emitters and micro-sprinklers. The inlet is standard 3/4-inch female hose thread with swivel which threads onto a hose faucet. The outlet is standard male hose thread to which you can attach a garden hose or a drip hose faucet adapter. The 150 mesh stainless steel filter ensures removal of even very fine particles. It uses an angle geometry which makes cleaning the filter as simple as removing the cap, turning the water on to flush out debris, and then replacing the cap. For drip applications, use the filter in combination with a 25 PSI hose thread pressure regulator (sold separately). For outdoor use with cold water only.

Rain Bird   Polypropylene Hose Thread Drip Irrigation Pressure Regulator

Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4" Female Hose Thread x 3/4" Male Hose Thread. This Drip irrigation pressure regulator connects quickly and easily to any 3/4” threaded outdoor faucet, garden hose or component. Properly regulates water pressure and flow to a Drip irrigation system; maintaining optimum 25 PSI pressure and water flow to Drip lines and emitter devices. Simply screw into place so rubber gasket seals to assure leak-proof performance. Constructed of highly durable UV and chemical-resistant materials to assure long life. Rain Bird “The Intelligent Use of Water”

Orbit   Nylon Hose Thread Drip Irrigation Filter

The Orbit 1/4-inch drip fittings press into the inside of 1/4-inch drip tubing and are held firmly in place by a barb. They come in a variety of shapes, including tees, elbows, couplings, and plugs, which allows them to satisfy the needs of many different garden layouts and container sizes. Drip fitting assortment packs are a convenient way to purchase a variety of fittings. Use the drip tubing punch tool to create a hole in 1/2-inch drip tubing which makes it easy to insert a 1/4-inch fitting into the tubing. For outdoor irrigation use with cold water only.

Orbit   Polypropylene Hose/Pipe Thread Drip Irrigation Pressure Regulator

The Orbit 25 PSI hose faucet pressure is engineered for drip and sprinkler applications where controlled low pressure is important for optimum performance. It is available in 3/4-inch female pipe thread (FPT) and female hose thread (FHT), as well as professional versions. It reduces dynamic pressure to 25 PSI while allowing you to maintain up to 5 GPM of flow. For dirty water, we recommend the 3-in-1 drip filter pressure regulator which cleans the water before passing it through the filter. The pressure regulator is compatible with controllers and valves from Orbit, Hydro-Rain, and other major brands. We recommend B-hyve controllers for optimum water conservation. For outdoor use with cold water only.

Orbit   Polypropylene NPT Drip Irrigation Filter

The drip Y-filter is designed specifically for drip and sprinkler systems. It removes debris from the water supply and minimizes clogging in drip emitters, micro-sprinklers, and other small orifice sprinklers. The inlet and outlet are standard 3/4-inch male pipe thread (MPT) for easy connection to valves, pressure regulators, and Schedule 40 fittings. The 150 mesh filter ensures removal of even very fine particles. It uses a Y geometry which makes cleaning the filter as simple as removing the flush port cap, turning the water on to flush out debris, and then replacing the cap. For drip applications, use the filter in combination with a 25 PSI hose thread pressure regulator (sold separately). For outdoor use with cold water only.