Google Motion Sensors & Detectors

SABRE   Chime Alert Outdoor Motion Sensor

A burglary occurs every 14.5 seconds in the United States, and the average 911 response time has climbed to 10 minutes due to federal budget cuts. Help secure your home at each entry point. Should an intruder attempt to enter, a loud alert will sound immediately. The noise from the sensor helps deter entry, while also alerting you and others to the intrusion. These alarms are battery powered, and thus easy to mount anywhere you would like to deploy them. Compact size and white finish, they work seamlessly with all home decor styles.

Swann   Indoor Motion Sensor

This easy to use Alpha Series wireless safety system combines a PIR motion sensor and chime unit. Additional motion sensors and door button units can all be connected to the same portable chime/receiver unit.

Power Gear   Outdoor Motion Sensor

Stay alert with Power Gear's Wireless Motion-Sensing Alert. This battery operated motion-sensing alarm sends an audible alert chime inside of your home when motion is dectected within 25-feet of the sensor.

Ring   Alarm Wireless Motion Detector (2nd Gen)

Ring Alarm Motion Detector expands your Ring Alarm and adds an extra layer of security to your home. When your Ring Alarm system is armed, the Motion Detector sends instant alerts to your phone and tablet whenever motion is detected at home. The Motion Detector is a simple addition to your Ring Alarm that installs in minutes. Simply place your Motion Detector in a corner of any room in your home, connect it to your Ring Alarm Base Station, and you’re all set up!

Lithonia Lighting   Indoor Motion Sensor

The Sensor Switch CM PDT 10 large motion ceiling mount sensor combines a low voltage sensor into a low profile design, making it perfect to mount directly to a ceiling tile or metallic grid.

GE   Indoor Motion Sensor

GE-branded Wireless Motion-Sensing Alarm with Keychain Remote provides peace of mind by deterring would-be intruders within a 20-foot range. This simple-to-use, cost-effective security solution helps protect you and your family against home invasions thanks to the 120-decibel alarm — loud enough to make a would-be intruder think twice about entering your home. The user-friendly alarm is also extremely easy to use, featuring a subtle design with easy-access buttons and controls for simple operation. Quick and easy installation means your home will be secured within minutes. 45-second exit delay and 30-second entry delay provides ultimate flexibility by allowing you to enter or exit the area before activating. The convenient keychain remote activates and deactivates the alarm from anywhere in your home. With the low-battery indicator light on, you can ensure that your motion-sensing alarm is always ready to go. Perfect for homes, apartments, offices and more, the GE-branded Wireless Motion-Sensing Alarm with Keychain Remote will provide you with peace of mind for years to come

Ring   Alarm Wireless Motion Detector 2-Pack (2nd Gen)

Ring Alarm Motion Detector expands your Ring Alarm and adds an extra layer of security to your home. When your Ring Alarm system is armed, the Motion Detector sends instant alerts to your phone and tablet whenever motion is detected at home. The Motion Detector is a simple addition to your Ring Alarm that installs in minutes. Simply place your Motion Detector in a corner of any room in your home, connect it to your Ring Alarm Base Station, and you’re all set up!

Sensor Switch   Contractor Select CMR Smart Compatible Indoor Motion Sensor

The SensorSwitch CMR 9 small motion, line voltage ceiling mount occupancy sensor offers a low profile design, making it perfect to mount directly to a ceiling tile or metallic grid. With a variety of lens options, CMR sensors utilize 100% passive Infrared detection and is powered directly from line voltage without the need of a power pack. Programming CMR sensor setting can easily be achieved via push button or optional flash programming via the SensorSwitch VLP Mobile App. With either programming method, the user can change time delay.

Lithonia Lighting   Indoor Motion Sensor

The Sensor Switch CMR PDT 10 large motion, line powered ceiling mount sensor provides maximum viewing from the ceiling. Its circular coverage pattern is designed for walking motions, making it ideal for T-shaped intersections in corridors.

Sensor Switch   Contractor Select WSX Indoor Motion Sensor

The WSX family of wall switch occupancy sensors provide simple and cost-effective solutions for commercial and residential lighting control applications. With your choice of passive infrared (PIR) or dual technology (PDT) with PIR plus patented Microphonics detection, the WSX family provides reliable sensing and dimming performance optimized for your space. All WSX family sensors have a modern low-profile appearance, soft-click buttons and small motion detection up to 20 feet (6.10 m), making them ideal for private offices, private restrooms, closets, copy rooms or any other small enclosed space.

Lithonia Lighting   Indoor Motion Sensor

The 360° fixture mounted motion sensor from Lithonia Lighting is designed to save energy and money by automatically turning lights on when you need them and off when you don't. Perfect for operating single or multiple fixtures in commercial and residential locations. It is easy to install and wire to LED or fluorescent bay lights, strip lights and wraparound light fixtures.

Swann   Outdoor Motion Sensor

Swann’s gate alert kit is an easy to use safety alert system to detect wanted and unwanted access through gates, doors and entrances. Connect the kit in minutes with easy mounting, pairing of the receiver unit and sensor, and convenient 100% wireless operation using everyday AA and AAA batteries.

Swann   Outdoor Motion Sensor

Set and connect the alert sensor and receiver in minutes. Installation is hassle-free as there’s no messy wiring to content with. It’s battery-power all the way, baby, as the the receiver unit uses 3 x AA batteries (not included) and the alert sensor uses 3 x AAA batteries (also not included). Place the alert sensor in areas needing protection or vulnerable to unwanted intrusion, such as driveways, the front or back doorway, retail store entrances, reception areas, storerooms and more. Alternatively, use the system as an aid to good customer service, notifying you when customers enter and leave your business at any hour. The PIR sensor can pick up motion up to 40 ft/12 m away. Expand your security by purchasing more Swann alert sensors and pair with any compatible Swann receiver unit (not included) to monitor multiple critical areas at once such as entrances, driveways, doorways, hallways, garages, etc.

GE   Indoor Motion Sensor

Be alerted when your windows are tampered with or broken with the GE Glass Vibration Alarm. This easy-to-install alarm monitors windows or glass doors for tampering or breakage. The alarm will sound when it detects vibration or break-in. Attach to any window or glass surface with the peel-and-stick application. The alarm features a hi/low sensitivity setting for your convenience. The alarm requires four LR44 batteries (included). It comes with a 90-day limited warranty. This alarm provides a simple-to-use, cost-effective security solution to protect you and your family. Thanks to a reliable alarm siren, a would-be intruder will think twice about entering your home. This user-friendly alarm will provide you with the extra coverage you need. When installed and armed, the alarm will alert you and deter unwanted visitors. The uncomplicated, wire-free design of these alarms are perfect for homes, apartments, dorm rooms and offices alike. Experience great peace of mind by adding a dependable layer of security to your home with the GE Glass Vibration Alarm

WAC Lighting   Endurance Outdoor Motion Sensor

The Endurance wall pack collection features a patent pending design for water and dust proofing, encased in an IP66 rated factory sealed light engine. Thermally engineered for up to 100,000 hours of rated life, the Endurance virtually eliminates any need for maintenance once installed. LED technology offers superior alternatives to conventional Halogen and HID sources. With factory sealed die-cast aluminum housings, the Endurance collection is sure to provide lasting worry-free performance for years.

WAC Lighting   Endurance Outdoor Motion Sensor

The Endurance wall pack collection features a patent pending design for water and dust proofing, encased in an IP66 rated factory sealed light engine. Thermally engineered for up to 100,000 hours of rated life, the Endurance virtually eliminates any need for maintenance once installed. LED technology offers superior alternatives to conventional Halogen and HID sources. With factory sealed die-cast aluminum housings, the Endurance collection is sure to provide lasting worry-free performance for years.

Sensor Switch   Contractor Select CM Indoor Motion Sensor

The Sensor Switch CM 9 small motion ceiling mount sensor combines a low voltage sensor into a low profile design, making it perfect to mount directly to a ceiling tile or metallic grid.

Swann   Indoor Motion Sensor

Attach this Sensor where it's needed to detect and notify you of movement involving heat and motion from people or pets. Use it to monitor entrances, thoroughfares, spaces requiring authorized entry, anywhere beyond your line of sight to detect motion, movements and much more. The PIR (Passive Infrared) Motion Sensor can be integrated into a complete security system managed on the Swann Security app to receive alerts. It can even be connected to the Indoor Siren for an audible and visible alarm that's a powerful deterrent for intruders.

Swann   Outdoor Motion Sensor

Swann’s wireless home doorway alert kit is an easy to use alert system to suit 2 entrances that sounds an alarm when motion is detected. Built for home and business security, the kit is 100% cable free and has everything you need in the pack for DIY installation. The home doorway alert kit detects motion from two PIR sensors and sounds an audible alarm when someone enters a door or your property, or a car enters a garage or driveway. It’s perfect for front and back doorways, retail entrances and storerooms, driveways and outside entrances. The system has a long 100% wire-free signal so you can position the sensors on your front gate and your back doorway up to 200 ft (60 m) away from the receiver unit. With two sensors it’s double the security. The home doorway alert kit from Swann – it’s advanced security made easy.