Punches

TEKTON   1/16 in Nail set punch

Put the final touches on molding, trim, furniture, and cabinetry using TEKTON Nail Sets to neatly and safely countersink finishing nails below wood surfaces.

TEKTON   20-pc. Punch and chisel set punch Kit

The Tekton 20-Piece Punch and Chisel Set has four punch and chisel types that are carefully machined to meet exact tolerances: pin punches, solid punches, center punches, and cold chisels. Each punch and chisel is individually heat treated to harden and strengthen the tip while maintaining the soft temper of the striking end. The striking end absorbs hammer blows without chipping. Each tool is made from 5160 high carbon steel and finished with a dry, rust-preventative coating. The sizes are marked with a high-visibility laser marking. All Tekton punches and chisels are made in the USA.

Capri Tools   1/8-in Letter punch set punch

The Capri Tools Professional 1/8-in Letter Stamp Set is made from premium components. We use premium Chrome Vanadium steel that's been differential heat treated to achieve optimal performance and durability: 62 HRC hard stamping end produces high quality imprints and keeps the edges sharp, and 42 HRC tough hammering end excels at absorbing repeated hammer strikes and maintaining durability. Large, true-to-size, and expertly machine letters ensure the imprints are precise and refined on leather, wood, copper, brass, aluminum and mild steel. Each stamp punch has engraved sizing and identification on the side facing you, making is easy to fine the right stamp and the right orientation. This set includes 27 stamps letters A-Z in uppercase and the ampersand. Comes in a heavy-duty storage case.

TEKTON   9-pc. Set Pin punch Kit

Ideal for machine and vehicle repairs, the TEKTON 9-Piece Pin Punch Set smoothly drives out or inserts solid pins without damaging them. The punch tip is slightly wider than the rest of its shaft so that it won't get stuck in pin holes. Each tip is carefully machined to meet exact tolerances. This set contains 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8 inch pin punches. Made in USA.

TEKTON   20-pc. Punch and chisel set punch Kit

The Tekton 20-Piece Punch and Chisel Set with Pouch has four punch and chisel types that are carefully machined to meet exact tolerances: pin punches, solid punches, center punches, and cold chisels. Each punch and chisel is individually heat treated to harden and strengthen the tip while maintaining the soft temper of the striking end. The striking end absorbs hammer blows without chipping. Each tool is made from 5160 high carbon steel and finished with a dry, rust-preventative coating. The sizes are marked with a high-visibility laser marking. All Tekton punches and chisels are made in the USA. Carry your punch set anywhere with the compact roll-up pouch that keeps punches well-packed and unable to slide out. The pouch is specifically designed for the punches and chisels in our 20-piece set. The polyurethane-backed 600 x 600 denier polyester is both abrasion and tear resistant, and has a durable water repellent (DWR) coating.

TEKTON   High Torque Scratch and Punch 4 in. Awl punch

The Tekton Scratch and Punch Awl with High-Torque Handle has a strong, stout blade that is heat treated to 52–56 HRC to make the blade strong without being brittle. The overmolded grip provides a nonslip surface that is permanently bonded to the handle and won't degrade or become sticky over time. The handle's three-sided contoured geometry directly engages the structure of your hand for greater comfort and control. The blade is insert molded into the handle, and two “wings” at the base of the blade resist pushing, pulling, and twisting. Use the awl to scratch thin lines onto a workpiece, mark centerpoints, punch holes into soft materials, or align holes in parts.

Klein Tools   Broad-Head Bull Pin, 1-1/16-Inch

The Klein Tools Broad-Head Bull Pin is machined from quality alloy steel and resists corrosion and mushrooming. Its angled head and smooth blending of radii increase strength and reduce the danger of chipping.

TEKTON   Hard Handle Scratch and Punch 4 in. Awl punch

The Tekton Scratch and Punch Awl with Hard Handle has a strong, stout blade that is heat treated to 52–56 HRC to make the blade strong without being brittle. A black oxide finish is applied to prevent corrosion. Keep lightly oiled. The handle is made of a hard glass-reinforced nylon that's easy to clean and resistant to fuels, oils, and chemicals. Contoured sides create natural positions for your fingers, and the rounded square shape fits comfortably in your palm. The blade is insert molded into the handle, and two “wings” at the base of the blade resist pushing, pulling, and twisting. Use the awl to scratch thin lines onto a workpiece, mark centerpoints, punch holes into soft materials, or align holes in parts.

TEKTON   1/4 in Alignment punch

The long taper of the self-centering TEKTON 1/4 in. Alignment Punch lines up holes in multiple parts, positioning them for accurate fastening or welding.

Klein Tools   Cushion-Grip Scratch Awl

From Klein Tools, the heavy-duty Cushion-Grip™ Scratch Awl is designed for the professional. The scratch awl features a one-piece forged-steel blade with a bolstered shank. Klein Tools scratch awl is designed for professionals and manufactured to Klein's high quality standards. The well-balanced steel scratch awl is heat-treated for long life and the black finish resists rust.

Southwire   4-Inch Max punch

Max Punch™ 360 Hydraulic knockout drive unit is a lightweight hydraulic knockout tool that features a full 360-degree articulating head for application in tight spaces. The pump action knockout cuts 4" holes in 12 gauge stainless steel quickly and easily.

TEKTON   7/16 in Center punch

The sharp point of the TEKTON 7/16 inch Center Punch marks workpiece with a dimple, creating an exact starting spot for drill that prevents it from wandering.

TEKTON   7/32 in Pin punch

Precise Tip: The tip is precisely machined to exacting tolerances, allowing it to smoothly drive out or insert solid pins without damaging or deforming them. Reverse Taper: A reverse taper ensures that the tip is slightly wider than the rest of the shaft, eliminating the possibility of it sticking in the pin hole. Carefully Balanced: Made from premium, high carbon steel, each punch is individually heat treated to harden and strengthen the tip while maintaining the soft temper of the striking end so it can absorb hammer blows without chipping.

TEKTON   5/16 in Pin punch

Ideal for machine and vehicle repairs, the TEKTON 5/16 inch Pin Punch smoothly drives out or inserts solid pins without damaging or deforming them.