Epoxy Adhesives

Simiron   Table Top Resin 2 -Pack Clear Epoxy Adhesive

SIMIRON Table Top Epoxy is a professional-grade, high-performance, ultra-clear, self-leveling, high-gloss, 100% solids epoxy resin coating. SIMIRON Table Top Epoxy is great for craft and furniture projects requiring a strong protective finish. It is great for river tables, live edge tables and countertops, bar tops, wood finishes, artwork and other creative applications. For a truly custom appearance, SIMIRON Table Top Epoxy can be mixed with pigment and mica powders, glitter, glow-in-the-dark pigments, alcohol inks, resin dyes and tints. SIMIRON Table Top Epoxy can be poured up to 1/8-in thick with excellent air release, making it simple to achieve flawless results. SIMIRON Table Top Epoxy features an easy-to-use 1:1 mix ratio.

Gorilla   Weld 2 -Pack Gray Epoxy Adhesive

GorillaWeld is an incredibly strong, heavy duty two part adhesive. The tough, steel bond epoxy formula has a 4250 PSI bond strength and sets in just 10 minutes. GorillaWeld is waterproof and versatile, creating a long lasting, permanent bond to: metal, plastics, concrete, ceramics, PVC, fiberglass and more!

The Tile Doctor   Litoelastic EVO Adhesive White Epoxy Adhesive

High-performance, white, two-component reactive adhesive for laying floors and walls indoors and outdoors of any type of ceramic tile, including reinforced thin slabs, mosaics, natural and reconstituted stone even on non-traditional substrates, such as wood, metal and fiberglass. Suitable for installations over existing tiles, on heated floors and in swimming pools. Product with ultra-low volatile organic compound (VOC) emissions. White two-part flexible reactive adhesive, water- and solvent-free, with high water repellency. Component A consists of synthetic resins, fine-grain inert aggregates and specific organic additives. Component B consists of an innovative organic catalyst. Once mixed together, the two components form an easily workable, thixotropic and particularly smooth paste that facilitates the work of installers.

J-B WELD   MinuteWeld Clear Epoxy Adhesive

MinuteWeld™ is a specially formulated, high-strength, two-part instant setting epoxy. MinuteWeld™ will set in one minute under most temperature conditions. MinuteWeld™ is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.

LOCTITE   Marine Off-white Epoxy Adhesive

Loctite Marine Epoxy can be applied and cured underwater and eliminates the need to drain out water before repairs. This unique epoxy is a resilient, two-part adhesive system consisting of an epoxy resin and a hardener. When mixed in equal volumes with the convenient dual-syringe applicator, the resin and hardener react to produce a tough, rigid, high strength bond that sets 2 hours and fully cures in 24 hours. Ideal for repairing PVC, copper, brass and galvanized pipes, Loctite Marine Epoxy bonds to metal, concrete, glass, fiberglass, ceramic, wood and certain rigid plastics and cures to a white finish that can be easily sanded or machined. This resilient epoxy does not shrink and is resistant to water, most common solvents, and high impact.

Fiberglass Coatings   Liquid Glass Clear Epoxy Adhesive

Our Liquid Glass Deep Pour Epoxy is absolutely unparalleled with a deep pour capability of 2-4 inches and gives you unmatched industry performance, convenience by eliminating 75% of your work, and the clearest finish you can get on the market today!

Fernco   Pow-R Wrap Off-white Epoxy Adhesive

Pow-r wrap is a strong, permanent and economical repair. Works on virtually every kind of pipe and hose. It's an easy alternative to traditional methods such as cementing, soldering, welding, sleeving and replacement. It works on wet, dry, clean, dirty or corroded pipes and even underwater, salt or fresh.

J-B WELD   Gray Epoxy Adhesive

J-B Weld KwikWeld is a fast-setting, two-part epoxy cold weld system designed for strong, lasting repairs to metal and other surfaces. With a 1:1 mixing ratio, it sets in just 6 minutes and is fully cured in 4-6 hours. After mixing, it forms a permanent bond that can be shaped, tapped, filed, sanded, and drilled. KwikWeld cures to a dark gray color, has a tensile strength of 4360 PSI, and withstands temperatures up to 230°F.

New Pig   PIG Epoxy Putty for Wet Surfaces Gray Epoxy Adhesive

This Plumbers Putty for Sink and Drain Repair by New Pig is perfect for wet surfaces and will plug or seal leaks, patch holes, and fill cracks in almost anything. Ideal for repairing bathroom plumbing, kitchen plumbing, bath tubs, shower heads, drains, pipes under the sink, repairing fittings, leaky gaskets, tanks, and most any other place in the home you would use plumbers putty. Curing may even occur under water. After curing, this plumbers putty can be drilled, sawed, filed, tapped, machined, sanded or painted. The home and bathroom putty has a working time of 25 minutes and cures concrete-hard in one hour at a tensile strength of 900 PSI. The wet epoxy putty will withstand temperatures up to 300 degrees F intermittently, 250 degrees F continuously.

Devcon   Devcon Home Clear Epoxy Adhesive

A two-part, rapid-curing, clear, general purpose epoxy. Sets up in 5 minutes and dries clear, resistant to most chemicals. All purpose bonding and repairs. Works best on metals, wood, concrete, ceramic, glass and china.

Devcon   Devcon Home Clear Epoxy Adhesive

A two-part, rapid-curing, clear, general purpose epoxy. Sets up in 5 minutes and dries clear, resistant to most chemicals. All purpose bonding and repairs. Works best on metals, wood, concrete, ceramic, glass and china.

PC Products   PC-11 Off-white Epoxy Adhesive

PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High wet grab or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool temperatures, place PC-11 containers near heat prior to using. PC-11 mixes and spreads easier at 80 degree F than at 40 degree F. any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11. Denatured alcohol is excellent for smoothing applied PC-11. Also use denatured alcohol to clean surfaces before applying. Use with: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations, as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks, as a filler: holes, castings, patterns, molds, voids, welds, and much more. Work time (70 degree F): 30-40 minutes. Tack free cure time: 90 minutes. Cure for service: 8-12 hours. Maximum cure: 7 day. Gardner impact resistance: 140 in./lb. Conduction (electric): non conductive. Excellent thermal shock.

PC Products   PC-11 Off-white Epoxy Adhesive

PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High wet grab or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool temperatures, place PC-11 containers near heat prior to using. PC-11 mixes and spreads easier at 80 degree F than at 40 degree F. any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11. Denatured alcohol is excellent for smoothing applied PC-11. Also use denatured alcohol to clean surfaces before applying. Use with: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations, as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks, as a filler: holes, castings, patterns, molds, voids, welds, and much more. Work time (70 degree F): 30-40 minutes. Tack free cure time: 90 minutes. Cure for service: 8-12 hours. Maximum cure: 7 day. Gardner impact resistance: 140 in./lb. Conduction (electric): non conductive. Excellent thermal shock.

PC Products   PC-11 Off-white Epoxy Adhesive

PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High wet grab or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool temperatures, place PC-11 containers near heat prior to using. PC-11 mixes and spreads easier at 80 degree F than at 40 degree F. any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11. Denatured alcohol is excellent for smoothing applied PC-11. Also use denatured alcohol to clean surfaces before applying. Use with: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations, as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks, as a filler: holes, castings, patterns, molds, voids, welds, and much more. Work time (70 degree F): 30-40 minutes. Tack free cure time: 90 minutes. Cure for service: 8-12 hours. Maximum cure: 7 day. Gardner impact resistance: 140 in./lb. Conduction (electric): non conductive. Excellent thermal shock.

PC Products   PC-11 Off-white Epoxy Adhesive

PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High wet grab or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool temperatures, place PC-11 containers near heat prior to using. PC-11 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11. Denatured alcohol is excellent for smoothing applied PC-11. Also use denatured alcohol to clean surfaces before applying. Use with: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations, as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks, as a filler: holes, castings, patterns, molds, voids, welds, and much more. Work time (70 degree F): 30-40 minutes. Tack free cure time: 90 minutes. Cure for service: 8-12 hours. Maximum cure: 7 day. Gardner impact resistance: 140 in./lb. Conduction (electric): non conductive. Excellent thermal shock.

PC Products   PC-Clear Epoxy Adhesive

PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt. Advisement: please be aware that PC-Clear will get warm when it cures. How warm it gets depends largely on the amount of resin and hardener mixed. The greater the quantity, the greater the amount of heat generated and potential temperature. Mix on a flat surface or using a static mixer. Use caution when applying to heat sensitive objects. Wear gloves and avoid getting on skin or eyes.

PC Products   PC-7 Gray Epoxy Adhesive

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume, variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations, as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks, as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Work time (70 degree F): 60 minutes. Tack free cure time: 160 minutes. Cure for service: 24 hours. Maximum cure: 7 day. Gardner impact resistance: 160 in./Lb. Conduction (electric): non conductive. Excellent thermal shock.

PC Products   PC-7 Gray Epoxy Adhesive Putty, 2-Part, 2 Fluid Oz., Interior/Exterior, Heavy Duty Paste for Bonding and Sealing

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume, variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations, as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks, as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Work time (70 degree F): 60 minutes. Tack free cure time: 160 minutes. Cure for service: 24 hours. Maximum cure: 7 day. Gardner impact resistance: 160 in./Lb. Conduction (electric): non conductive. Excellent thermal shock.

PC Products   PC-7 Gray Epoxy Adhesive

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume, variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations, as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks, as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Work time (70 degree F): 60 minutes. Tack free cure time: 160 minutes. Cure for service: 24 hours. Maximum cure: 7 day. Gardner impact resistance: 160 in./Lb. Conduction (electric): non conductive. Excellent thermal shock.