Red Head Anchoring Adhesive

Sika   10.1-fl oz Anchoring Adhesive

Sika AnchorFix-2 is a super strong two component anchoring adhesive system for threaded and reinforcing bars in uncracked concrete. It is ideal for heavy duty anchoring projects such as handicap rails and machine base plates. It is 5 times stronger than concrete and sets in only minutes.

Red Head   T7+ 10.1-fl oz Anchoring Adhesive

Red Head 10.1 Fl. Oz. concrete adhesive anchor features a fast cure formula that meets the highest standards of building codes and is approved for cracked and uncracked concrete and seismic applications. The versatile formula is easy to dispense at all temperatures and is moisture resistant for damp or submerged applications.

Simpson Strong-Tie   SET-XP 22-fl oz Anchoring Adhesive

SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.

Simpson Strong-Tie   SET-XP 8.5-fl oz Anchoring Adhesive

SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.

Simpson Strong-Tie   AT-XP 9.4-fl oz Anchoring Adhesive

Simpson Strong-Tie acrylic adhesive delivers consistent performance for high-strength anchor grouting in a wide range of weather conditions. Our acrylic formulations cure fast and are suitable for damp, wet or water-filled holes. AT-XP is a fast-curing anchoring adhesive for cracked and uncracked concrete. It has been formulated for high-strength anchorage of threaded rod and rebar into concrete under a wide range of conditions. AT-XP adhesive dispenses easily in cold or warm environments with little to no odor, and when mixed properly is a teal color for easy post-installation identification.

Sika   10.1-fl oz Anchoring Adhesive

Sika AnchorFix-1 is a specially formulated high-performance, two component anchoring adhesive system for threaded and reinforcing bars in uncracked concrete. Ideal for common anchoring projects such as dowels, bolts, and pins. It can be used with a standard caulk gun.

Simpson Strong-Tie   SET-3G 22-fl oz Anchoring Adhesive

SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40°F (4°C) to 100°F (38°C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.

Simpson Strong-Tie   ET-HP 22-fl oz Anchoring Adhesive

ET-HP is a two-component, high-solids, epoxy-based system for use as a high-strength, non-shrink anchor-grouting material. Resin and hardener are dispensed and mixed simultaneously through the static mixing nozzle. ET-HP is formulated for anchoring threaded rod and rebar into concrete (cracked/uncracked) and masonry.

Simpson Strong-Tie   SET-3G 8.5-fl oz Anchoring Adhesive

SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40°F (4°C) to 100°F (38°C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.

Simpson Strong-Tie   ET-3G 22-fl oz Anchoring Adhesive

ET-3G is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). ET-3G has a long working time — 50 min at 70°F (21°C) , and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50°F (10°C) to 110°F (43°C). Simpson Strong-Tie® epoxy anchors for concrete and masonry are rigorously tested to meet IBC requirements, including for both cracked and uncracked concrete applications.

Simpson Strong-Tie   ET-3G 8.5-fl oz Anchoring Adhesive

ET-3G is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). ET-3G has a long working time — 50 min at 70°F (21°C) , and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50°F (10°C) to 110°F (43°C). Simpson Strong-Tie® epoxy anchors for concrete and masonry are rigorously tested to meet IBC requirements, including for both cracked and uncracked concrete applications.

Simpson Strong-Tie   AT-3G 9.5-fl oz Anchoring Adhesive

Simpson Strong-Tie AT-3G™ is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G dispenses easily and offers a fast curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures, and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code compliant with the IBC and IRC, AT-3G hybrid adhesive is easy to install with the conventional blow-brush-blow hole cleaning method.

Simpson Strong-Tie   AT-3G 28-fl oz Anchoring Adhesive

Simpson Strong-Tie AT-3G™ is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G dispenses easily and offers a fast curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures, and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code compliant with the IBC and IRC, AT-3G hybrid adhesive is easy to install with the conventional blow-brush-blow hole cleaning method.

Simpson Strong-Tie   ET-3G 56-fl oz Anchoring Adhesive

ET-3G is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). ET-3G has a long working time — 50 min at 70°F (21°C) , and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50°F (10°C) to 110°F (43°C). Simpson Strong-Tie® epoxy anchors for concrete and masonry are rigorously tested to meet IBC requirements, including for both cracked and uncracked concrete applications.

3M   Super 77 13.8-oz Spray Adhesive

Versatile and forgiving, our 3M Super 77 Multipurpose Spray Adhesive forms a strong, permanent bond on multiple surfaces. From photo albums and art projects to light-duty repairs around your home, this 3M spray adhesive allows you to reposition materials to achieve the perfect look and it dries quickly once in place. Say goodbye to glues that ruin your project by soaking through the materials-this glue stays on the surface of materials, when used according to directions, yet provides excellent adhesion. Achieve a strong bond on your light-duty bonding projects with 3M Super 77 Multipurpose Spray Adhesive.

3M   Hi Strength 90 Spray 14-oz Spray Adhesive

Whether you’re a pro installing laminate or you're a DIY-er making repairs around your home, you'll love the industrial-strength bond of 3M Hi-Strength 90 Contact Adhesive. Designed for your heavy-duty bonding jobs, this adhesion spray adheres to wood, concrete, metal, plastics, and more and it holds strong even in hot conditions. Engineered for precise applications, 3M 90 spray adhesive features an adjustable nozzle that allows you to spray large, small, and vertical surface areas. If you make a mistake while positioning your materials, no worries-this 3M adhesive is initially low-tack to allow you more time to achieve the perfect placement. Formulated for fast drying, this 3M spray adhesive allows you to complete task after task without frustratingly long drying times. Go ahead-attach metal kickplates to doors or even new veneer to cabinets without the hassle of tools with 3M Hi-Strength 90 Contact Adhesive.

E6000   -fl oz Bonding Liquid Multipurpose Adhesive

E6000 is formulated to meet high performance industrial requirements, it's versatile, flexible and adheres to most substrates. E6000 has exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry and concrete. It also adheres strongly to leather, rubber, vinyl and many plastics. It will not break down or become brittle with temperature extremes. E6000 Bonds Everything So You Can Create Anything™.

LOCTITE   Threadlocker Blue 242 0.2 Fluid ounce(s) Automotive equipment Specialty Adhesive

Loctite Threadlocker Blue 242 is designed to lock and seal threaded fasteners and prevent loosening from vibration. Ideal for 6-19mm fasteners, this unique formula is great for small motors, mowers, and power equipment. Loctite Threadlocker Blue 242 protects threads and prevents from leaks, rusting, and corrosion and eliminates the need to stock up on expensive lock nuts and washers. Fast and easy to use, this medium-strength threadlocker sets in just 10 minutes and fully cures in 24 hours. Loctite Threadlocker Blue 242 is particularly suited for applications on less active substrates such as stainless steel and plated surfaces, where disassembly is required for servicing.

DAP   Weldwood 128 -fl oz Contact cement Liquid Multipurpose Adhesive

DAP Weldwood Contact Cement is a multi-purpose neoprene rubber adhesive that forms instant, high strength bonds on a variety of surfaces. Contact Neoprene Adhesive offers hundreds of uses for the home, office, and workshop. Forms strong bonds on contact to eliminate the need for clamps, temporary fasteners, and long set times. Typical uses include bonding high pressure laminates for counter tops, tabletops, and cabinets. Forms a durable, super-strong bond when parts are assembled and momentary pressure is applied. Product is intended for interior and exterior use. Read and refer to instructions on label prior to use. DAP products provide durable performance for a variety of projects.