Roofing Nailers

Metabo HPT   1-3/4-in 15 -Degree Pneumatic Coil Roofing Nailer

One of the best selling Coil Roofing Nailer (NV45AB2), it is extremely lightweight, (only 5.7 Lb.) making it the essential tool for the fast-pace working environment. It features rapid driving and unprecedented quick response with unique cylinder valve firing mechanism allowing you to fire up to 10 Nails per second. The Coil Roofing Nailer will fire all standard Roofing Nails ranging in size from 7/8 In. to 1-3/4 In. Its depth of drive adjustment will allow the user to drive the nail to the desired depth at operating pressure ranging from 70 to 120 psi.

Bostitch   1-3/4-in 15 -Degree Pneumatic Coil Roofing Nailer

This coil roofing nailer has a durable aluminum housing and a one-door loading system for fast reloading. It has a dry-fire lock out to prevent dry firing and to alert the user to reload the magazine. Depend on this coil roofing nailer for durability and comfort.

STINGER   CN100B Cap Nailer 1-in 15 -Degree Pneumatic Coil Roofing Nailer

STINGER CN100B Cap Nailer, 136252, is a best practice pneumatic tool for securing roofing underlayment, felt and house wrap where nails are required and speed is vital. The CN100B delivers code compliant cap nails featuring 1 in. nails with a 1 in. plastic collated cap that pass 2012 ICC Building Codes. Each plastic cap offers superior holding power to the traditional staple, while also diverting water away from the fastener opening. This means more secure underlayment and extra protection against wind and water damage. With each STINGER CN100B you will also receive a durable plastic case and protective eyewear.

WEN   2-1/2-in Pneumatic Coil Roofing Nailer

Remember when you could re-roof your roof? Nail shingles, insulation boards, waterproof tar paper, fiber cement roofing, siding, vinyl and more with the WEN Pneumatic Coil Roofing Nailer. The versatile magazine holds up to 120 nails at a time, allowing for sizes of 11-gauge (.12 inches) nails ranging from 3/4 of an inch all the way up to 1-3/4 of an inch. Adjust the depth of the fired nails by turning the depth-setting wheel found on the head of the nailer. Clear jammed nails with the quick-release compartment on the side of the magazine. The adjustable shingle guide easily slides up and down the bottom of the magazine to help with quick and easy spacing for shingles of any size. This powerful nailer provides up to 430-inch-pounds of force at a 100 PSI operating pressure, making sure your siding stays in place. The rubber grip handle helps limit fatigue and maximize comfort during long jobs while the turnable exhaust valve on top of the nailer lets users aim the direction of the output air. With a 1/4-inch NPT air inlet, drive fasteners using pneumatic pressure anywhere from 70 to 120 PSI. This package also includes a bottle of oil, three assorted hex wrenches and a convenient blow-mold carrying case for easily transporting your nailer. And, because its a WEN product, your coil roofing nailer comes backed by a one-year warranty and a friendly customer phone line all to make sure you remember WEN.

Bostitch   Bulldog 1-3/4-in 15 -Degree Pneumatic Coil

The Bostitch BRN175 combines performance and adjustability to handle roofing applications. This lightweight 4.8-lb roofing nailer drives 3/4-in to 1-3/4-in coil roofing nails. It has two firing modes, single sequential and contact mode, which can be selected using the dial above the trigger. A wheel adjusts the drive depth so that nails can be properly installed into a variety of materials. This roofing nailer also comes with a rubber comfort grip and carbide in the contact arm to help extend the life of the tool.

Metabo HPT   BONUS 18V Triple Hammer Bolt Impact Driver and 1-3/4-in 15 -Degree Pneumatic Coil Roofing Nailer ( Charger Included )

The new Metabo HPT Pro Roofing Bundle includes our Pro Preferred 1-3/4 in Coil Roofing Nailer with BONUS Triple Hammer Bolt Impact Driver Kit with Battery and Charger. The Coil Roofing Nailer (NV45AB2) is extremely lightweight at only 5.7 lbs and its unique cylinder valve firing mechanism allows you to fire up to 3 nails per second for rapid driving and unprecedented quick response. The depth of drive adjustment allows users to drive nails to the desired depth at operating pressure ranging from 70 to 120 psi. The Coil Roofing Nailer will fire all standard Roofing Nails ranging in size from 7/8 to 1-3/4 in. The next generation BONUS 18V Cordless Triple Hammer BOLT Impact Driver (WH18DCQ4) features innovative upgrades including a third anvil and now 5 speed settings (including the powerful BOLT mode that efficiently tightens and loosens large bolts and nuts) allowing it to achieve 1,859 in-lbs of torque, 4,000 BPM, and 3,700 RPM driving speed, while also reducing vibration. It is ultra-compact (4.5 in long) and lightweight (2 lbs) and has a shadow minimizing triple LED light allowing users more access and visibility in tight dark spaces for all day use. The tool body is IP56 rated with added protection against dust and water exposure so you can GO all day on any job. Also included is the BONUS MultiVolt 18V/36V Water & Impact Resistant Battery (380083M) and charger. A waterproof barrier exists for the internal cell terminals and twin exit ports for water that gets inside the battery pack for better defense against moisture related short circuiting. An impact resistant protective layer provides 15% more shock absorption and a longer battery life than previous models to lessen damage from drops and rough use. It has a 5.0Ah capacity with 18V tools and 2.5Ah capacity with 36V tools and features a battery fuel gauge for user convenience. The MultiVolt battery design helps prevent overheating when pushed to the limit and works at temperatures as low as 14°F (-10°C).

MAX   SuperRoofer 3/4-in 15 -Degree Pneumatic Coil Roofing Nailer

The MAX CN445R3 super roofer is a top of the line professional grade pneumatic roofing nailer. The applications for the CN445R3 include fastening asphalt and fiberglass shingles, fastening lath wire to plywood, the installation of siding, and wooden box assembly.

FREEMAN   Freeman G2 Pneumatic Tools 1-3/4-in 15 -Degree Pneumatic Coil Roofing Nailer

The Freeman 2nd Generation Pneumatic 15 Degree Coil Roofing Nailer has been completely redesigned with contractors' needs in mind. Re-engineered internal components, top of the line features, and enhanced driving power make this roofing nailer more powerful and reliable than ever before. This durable air powered nail gun delivers high-quality performance for asphalt and cedar shingles, roof and wall sheathing, flooring underlayment, siding, shipping crate assembly, and wood fences. Optimized airflow and upgraded internal parts provide increased power with less air consumption, while also allowing for quick and easy repairs. Designed for maximum comfort and control, other features include a select fire trigger, tool-free depth of drive, a transparent bucket, a shingle guide, and an updated textured grip. The Freeman 2nd Generation Pneumatic 15 Degree Coil Roofing Nailer comes with a 1/4" NPT air connector, and is backed by an industry-leading 7 Year Professional Warranty and 90 Day Wearable Parts Warranty.

Estwing   Estwing Roofing Nailer 1-3/4-in 15 -Degree Pneumatic Coil Roofing Nailer

The Estwing ECN45 Pneumatic 15 Degree 1-3/4 in Coil Roofing Nailer with Bag is the ideal tool for installing asphalt and cedar shingles, roof and wall sheathing, flooring underlayment, siding, shipping crate assembly, and wood fences. This air powered roofing gun is both durable and lightweight, resulting in a rugged tool perfect for extended use. Designed for superior comfort and performance, the nailer features a select fire trigger to easily switch between bump and sequential modes, tool-free depth of drive for easy adjustments, a transparent bucket to see when fasteners run low, a comfort grip handle to reduce fatigue and increase control, and a shingle guide for precise placement of shingles. Suitable for any professional construction contractor at the jobsite or DIYer at home, this roofing nail gun includes a heavy duty zippered canvas bag with detachable shoulder strap and 1/4 in NPT swivel plug. The Pneumatic 15 Degree 1-3/4 in Coil Roofing Nailer is part of Estwing's professional line of pneumatic tools, and is covered by a 5 Year Professional Tool Warranty and 90 Day Wearable Parts Warranty.

Bostitch   Bulldog 1-3/4-in 15 -Degree Pneumatic Coil

The Bostitch BRN175 combines performance and adjustability to handle roofing applications. This lightweight 4.8-lb roofing nailer drives 3/4-in to 1-3/4-in coil roofing nails. It has two firing modes, single sequential and contact mode, which can be selected using the dial above the trigger. A wheel adjusts the drive depth so that nails can be properly installed into a variety of materials. This roofing nailer also comes with a rubber comfort grip and carbide in the contact arm to help extend the life of the tool.

Metabo HPT   1-3/4-in 15 -Degree Pneumatic Coil Roofing Nailer ( Charger Included )

Match one of the best selling roofing nailers on the market, the NV45AB2M with the ultra powerful and versatile MultiVolt 36V circular saw for ultimate jobsite efficiency. The Metabo HPT roofing nailer has been a go-to for the roofing industry for decades featuring speed and durability. The award winning MultiVolt 36V circular saw features a cut capacity of 1-7/8-in at 45 degrees and 2-7/16-in at 90 degrees, a dust blower, an electric brake, soft start and at only 9.7 lbs, this saw is ideal for any jobsite.

CRAFTSMAN   V20 2-in 18 -Gauge Cordless Straight Brad Nailer (Battery Not Included and Charger Not Included)

Eliminate the need for compressors, hoses, and gas cartridges. The V20* 18 Ga. Cordless Brad Nailer has a powerful motor that delivers consistent power in various weather conditions and materials, and the nailer can drive up to 420 nails per charge. The tool-free depth setting allows you to adjust the nail depth quickly. A contoured over-molded handle and lightweight design helps to minimize user fatigue.

Kobalt   XTR 2-1/8-in 18 -Gauge Cordless Straight Brad Nailer (Battery Included and Charger Included)

The Kobalt XTR 18-Ga Brad Nailer is the perfect tool for most applications such as residential trim work, cabinetry, furniture, and similar finishing applications. This tool is equipped with a pre-charged internal gas chamber to drive a piston which gives the user a similar feel to traditional pneumatic nail gun performance while eliminating the pain point of dragging an air compressor and hose around the jobsite. The XTR nailer delivers repeatable depth of drive due to the nearly instant reload technology so the user does not experience improperly sunk nails due to low air compressor lag. The pre-charged gas system provides instant nail delivery after the trigger is pulled. The 18-Ga nailer is equipped with an electronic control panel that allows the user to easily turn the tool ON with the touch of the power button. The user can also easily choose from sequential or contact actuation (bump) mode using the control panel. This cordless nailer delivers on all the features you would expect from a premium performance nailer including the ability to accept 5/8-in to 2-1/8-in long brad nails, 110 nail magazine capacity, tool-free drive depth adjustment, dry-fire lockout, tool-free jam clearing mechanism, magazine site window, and no-mar pads to protect the workpiece.

Metabo HPT   2-in 18 -Gauge Pneumatic Straight Brad Nailer

The NT50AE2 2-in 18-Gauge Brad Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8-in length up to 2-in. With tool-less depth adjustment and no-mar tip, this is the perfect tool for any finish work.

CRAFTSMAN   V20 2-1/2-in-in 16 -Gauge Cordless Straight Finish Nailer (Battery Not Included and Charger Not Included)

With a powerful motor that offers consistent power in various climates and materials, the V20* 16 Ga. Cordless Finish Nailer is designed to eliminate the need for compressors, hoses and gas cartridges. This nailer can drive up to 375 nails per charge. The tool-free depth setting allows you to adjust the nail depth quickly. A contoured over-molded handle and lightweight design helps to reduce user fatigue.

Metabo HPT   2-1/2-in 16 -Gauge Pneumatic Straight Finish Nailer

The 16-Gauge Finish Nailer (NT65M2S) features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2S accepts 16-gauge finish nails in lengths ranging from 1" Up to 2-1/2" and is equipped with Metabo HPT's signature air duster button to conveniently blow away dust and debris instantly to clear the work surface.

Metabo HPT   MultiVolt 2-in 18 -Gauge Cordless Straight Brad Nailer (Battery Included and Charger Included)

The Pro Preferred Brand of Pneumatic Nailers introduces the 18V Brushless Compact Cordless 18 Gauge Brad Nailer (model NT1850DFT) that is 30% more compact and 31% lighter than the previous model. Now, with a 2.0Ah battery with fuel gauge, it delivers a driving speed of up to 2 nails per second, saving valuable time and increasing productivity. It is ideal for molding installation, cabinet assembly, wainscoting, chair rail, window and door casings, and decorative trim. Forget the hassle of having to drag long hoses or compressors around, or having to deal with gas cartridges, and GO cordless. This 18 Gauge Brad Nailer delivers a similar feel to a pneumatic nailer thanks to Metabo HPT’s unique Air Spring Drive System. Combine the pneumatic-like feel with the convenience and power of the 18V or MultiVolt battery, and this cordless Brad Nailer works all day long, driving 5/8-to-2-inch nails. Get 1300 nails per charge with the included 2.0Ah compact battery. It features tool-less depth of drive, bright LED light, side lock safety switch, integrated belt hook, and selective actuation between sequential and bump fire nailing. Backed by Metabo HPT’s Lifetime Lithium-Ion tool body warranty, it’s a safe bet for the long haul. The 18V 18 Gauge Cordless Brad Nailer is a part of the expanding MultiVolt System of 18-Volt and 36-Volt power tools from Metabo HPT. GO lighter with 18V batteries or GO longer with the unique MultiVolt battery that works on both 18V and 36V tools to double your runtime for up to 8.0Ah of run time per charge for more power on the GO.

Metabo HPT   2-1/2-in 15 -Degree Pneumatic Siding Nailer

The 2-1/2 inch Coil Siding nailer (NV65AH2) brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" X 0.099" at a rate of 3 per second, The NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, This professional siding nailer gets even better. Additional features such as the adjustable Air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

Metabo HPT   2-1/2-in 15 -Gauge Pneumatic Angled Finish Nailer

The NT65MA4 15-gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. The NT65MA4 nailer has a compact body and angled magazine making for easier placement and operation in tight angles. The integrated air Duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" Up to 2-1/2" In length.