Unique Bargains Mini PIR Motion Sensor Switch DC 5-24V 2A Infrared Activated LED Controller with USB Couple Cable for LED Strips Lights Black
Item #8023664 |
Model #S25093001UX9024
Marketplace items sold by a third party are not eligible for Lowe’s offers.
This PIR motion sensor is an infrared human body sensor switch, which is controlled by motion and is widely used in LED strips, sports lighting, human body monitoring, auto-matic sensing devices, etc. The sensor only functions properly when the surrounding light is below 10LUX, such as during nighttime or in darker environments. When people enter the sensor's detection range under these conditions, it will activate. However, if the light is too bright, the sensor will not work.
What will I get?
Product Name: PIR Motion Sensor
Connector Type: USB
Color: Black
Material: Plastic
Output Current: <2A
Operating Voltage: DC 5-24V
Output Power: <20W
Delay Time: 5-3600 second
Size: 36x36x27 mm/1.42x1.42x1.06 inch(L*W*H)
Total Length(Include Cable): 30.5cm/12"
Package Content: 1 x PIR Motion sensor with DC coupler cable, 1 x Screw, 1 x Round double-sided sticker
Are there any advantages of the product?
The LED sensor is designed with ABS plastic, which is very durable and insulating.
Mini size does not take up space.
The switch setting can be delayed for 5-3600 seconds, saving time and energy.
Infrared auto-matic induction device no longer needs to manually switch lights, free hands.
How to use it?
1. When the PIR sensor is started, the signal triggered by the module is unstable, and it needs a "warm-up time" to work normally, about 1min.
2. The installation direction is left and right, and the signal will be better.
What should I notice?
2. The controller signal output line and input line should be connected correctly. Also, please attention that this is not applicable for LED lights with the modes feature.
This PIR motion sensor is an infrared human body sensor switch, which is controlled by motion and is widely used in LED strips, sports lighting, human body monitoring, auto-matic sensing devices, etc; The sensor only functions properly when the surrounding light is below 10LUX, such as during nighttime or in darker environments; When people enter the sensor's detection range under these conditions, it will activate; However, if the light is too bright, the sensor will not work.
The LED motion sensor switch provides here is: Output Current: <2A; Operating Voltage: DC 5-24V; Output Power: <20W; Delay Time: 5-3600 second; Size: 36x36x27 mm/1.42x1.42x1.06 inch(L*W*H);Total Length(Include Cable): 30.5cm/12"
The LED sensor is designed with ABS plastic, which is very durable and insulating; Mini size does not take up space; The switch setting can be delayed for 5-3600 seconds, saving time and energy; Infrared auto-matic induction device no longer needs to manually switch lights, free hands.
When the PIR sensor is started, the signal triggered by the module is unstable, and it needs a "warm-up time" to work normally, about 1min; The installation direction is left and right, and the signal will be better.
Please don't expose it to direct sunlight, heaters, strong wind, or air conditioners; Please don't fix it at obstacles that infrared rays cannot penetrate; The controller signal output line and input line should be connected correctly; Also, please attention that this is not applicable for LED lights with the modes feature.