Sonifex SON-RB-DS2 Redbox Stereo Delay Synchroniser- Time-Zone Delay

The RB-DS2 is a stereo audio delay synchroniser used for resynchronising audio to video following delay processes such as standards conversion, transmission delay, logo insertion, video aspect ratio conversion and network delays. It can be used for fixed installations to correct a permanent audio delay, or on an intermittent basis to provide occasional correction, for example for live links. Accepting digital audio signals up to 96kHz, 24 bit, the sonic quality of the RB-DS2 is superb and silent switching is used to provide the smoothest, cleanest audio delay.The RB-DS2 has both balanced analogue and AES/EBU digital audio inputs and outputs on 3 pin XLR connectors. It can act as a combined A/D and D/A unit meaning that analogue inputs can be delayed and output as AES/EBU or vice-versa. It is a stereo delay, but can also be used as a dual mono delay, to process each audio path separately, or as a mono delay only. Specifications Analogue Pre-set Input Gain Range: Adjustable 3dB loss to 3dB gain ( L and R adjust) Input Impedance:> 10kO bridging Dynamic Range:> 110dB Maximum Input Level: +28dBu Analogue and Digital Input Levels: Selectable +12dBu, +18dBu, +24dBu for FSD Signal to Noise: Better than -101dBFS ( RMS A-weighted at 24bit) Distortion and Noise:> 96dB THD + N at 1kHz Maximum Output Level: +24dBu Dynamic Range:> 100dB Sampling Frequency: Selectable 32kHz, 44.1kHz, 48kHz 64kHz, 88.2kHz or 96kHz, Output Impedance: < 50O Sample Width: Selectable 16bit or 24bit Analogue Output Gain Range: Selectable -6dBu to +24dBu output level, ref FSD