The IPC-92 is an Ethernet to serial converter that can be used for Internet Protocol address ( IP) captioning. The unit is pre-setup at the factory to work with Link encoders. All setup is controlled through a web page that is stored in the device so no software installation is required, if for some reason you need to change the settings you just use any popular web browser. Using the IPC-92 means that a data phone line is no longer needed for captioning. Program audio will still have to be sent to the captioner via phone line, Skype, voice over IP, web streaming, or the list goes on. Features Ethernet to Serial Converter IP Caption Connection Ethernet to serial IP Captioning No software Pre-setup for Link Encoders Customizable Setup No Caption Data Phone Line No Caption Server Fees Web Interface Specifications Protection: 15Kv Esd On Rx Inputs and Tx Outputs Baud: 300 Bps To 240K Bps ( 1200 Default) Characters: 7 Or 8 Bits ( 8 Default) Interface: Ethernet 10Base-T Or 100Base-Tx ( Auto-Sensing) Protocols: Tcp/Ip, Udp/Ip, Telnet, Dhcp, and Auto Ip External Power Supply: 5V DC Regulated Positive Center Pin Power: 2A Indicator: Green LED Ambient: 0 degrees C To 40 degrees C Relative Humidity: <95 Non-Condensing Dimension: 1.4-" H x 4.5-" W x 2.6-" L Weight: 1 lbs
The IPC-92 is an Ethernet to serial converter that can be used for Internet Protocol address ( IP) captioning. The unit is pre-setup at the factory to work with Link encoders. All setup is controlled through a web page that is stored in the device so no
Made from Top Quality material