Doug Fleenor Design DFD-PRE10-A Architectural Playback Device for Up to 10 Snapshots- 1 Active Preset

The Doug Fleenor Design PRE10-A Preset 10 Architectural is a lighting control station capable of storing up to ten presets. The PRE10-A actions-"Radio Button-" operation, where only one preset may be active at time. These presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned a unique fade time, from 0 to 999 seconds. Presets are recalled by pressing one of the buttons. Systems can be created by using one or more stations and a power supply. The solid aluminum faceplate is designed to install over a standard single gang electrical box. Connections to the Preset 10 Architectural are power ( 2 wires) and DMX512 ( 3wires). Power for the Preset 10 can be supplied from a variety of sources, including a 10V class 2-"doorbell-" transformer.The Preset 10 Architectural system can work in conjunction with a lighting console, automatically switching between preset and console control. W hen the console generates a DMX512 signal the Preset 10 Architectural goes off-line. The console then operates normally. Upon loss of DMX512 from. Features PRE10-A Preset 10 Architectural is a lighting control station capable of storing up to ten presets Systems can be created by using one or more stations and a power supply Specifications Color: Black anodized with silver engraved nomenclature MSTB 2,5/5-ST-5,08 Order Number: 17 57 04 8 Connector: Phoenix Get through MSTB series 5 position two part terminal block Input/Output circuit: ESD protected EIA-485 transceiver Indicators: Ten green preset indicator LEDs, One red Lockout/Record LED User controls: Ten preset push buttons, One recessed record push button and One recessed fade time push button Option jumpers: Master/Slave mode selection, Pervious preset/Hold last look mode selection Power input: 9 to 15 volts AC or DC/200mA per station Weight: 0.1 lbs