Attero Tech UNAIO2X2PLUS 2 x 2 Channel AES67 Mic, Line Input and Output Interface- PoE or 24VDC- AES67

The Attero Tech unAIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels ( in and out) of analog audio to any AES67-based networked audio system.The unAIO2x2+'s small form factor and PoE power capability make it easy to put AES67 connectivity where it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring. The unAIO2x2+ includes several features such as true +48V phantom Power, maximum input and out levels of +20dBu, several input gain settings, and full output level control. Features 2 Mic/Line balanced analog inputs supporting -12 dB ( pad active), 0dB, +15dB, +30dB and +45 dB gain ( software selectable) 2 line level balanced analog outputs ( 0dB to -60dB plus mute software selectable) Input gain, output gain, and +48V phantom power controllable via software over the network Powered by either IEEE 802.3af PoE or +24VDC from an external supply Small form factor, can be unobtrusively located near analog sources or sinks Dual power ( DC or PoE) means the unAIO2x2+ will work in systems with either standard or PoE Ethernet switches +48V phantom power per channel Built-in tone generator for audio system diagnostics AES67 is compatible with all QSC Core DSPs Specifications Power: 24VDC Input Type: Balanced and RF filtered 3-pin depluggable Gain: -12 dB Input Pad, 0dB, +15dB, +30dB, +45 dB software selectable Input Impedance: Greater than 1.8K Ohm at Any Gain Setting Phantom Power: +48V, software selectableAudio Outputs Output Type: Balanced line level with automatic muting on loss of AES67 signal Maximum output level: +20dBu ( at 0dB volume)Audio Performance System THD: Audio Network Physical Level: Standard Ethernet Connector: Single RJ-45 Cable Quality: CAT-5e or Better Transmission Speed: 100 MBPS 1ms Power Requirements PoE 802.3AF PoE PD compliant Cable Quality: CAT-5e or better Physical Dimension: 6.45 x 1.06 x 3.45 in. Weight: 1.1 lbs